Six hierarchical levels of sand heterogeneity that would be present in analogous reservoirs are recognized in a Mississippi River meander-belt system in southeastern Missouri: (1) meander belt, (2) meander scroll, (3) channel, point bar, and splay, (4) lobe sheet, (5) bedding unit, and (6) laminae.

Heterogeneity level 1 is similar in size to an oil field and consists of (1) 9 million ac-ft (11.1 billion m{3}) of high-permeability channel sands in numerous meander scrolls and (2) 4 million ac-ft (4.9 billion m{3}) of low-permeability clay plugs (in numerous abandoned channels) that separate a field into isolated pools and reservoirs. Overbank flood-plain muds capping the meander-belt system are barriers to vertical migration of fluids. Heterogeneity level 2 is the size of pools within a field and has 1.2 million ac-ft (1.5 billion m{3}) of highly permeable, laterally accreted channel and point-bar sands, partly or wholly isolated from other sand bodies by low-permeability, abandoned-channel clay plugs. Abandoned mud-filled chutes impede lateral migration of fluids in the upper pa ts of the meander scroll.

The third level of heterogeneity is composed of about 70,000 ac-ft (86.3 million m{3}) of individual, permeable channel, point-bar, and crevasse-splay sand bodies, with numerous thin sheets and lenses of low-permeability muds and silts (derived from chute fill and mud drapes) that impede vertical migration of fluids. Heterogeneity level 4 is the lobe sheet unit (reservoir pay zone about 450 ac-ft or 555,000 m{3} in volume) comprising channel, point-bar, and splay sand bodies.

The fifth level of heterogeneity is the single bedding unit (about 10 ac-ft or 12,000 m{3}) at the scale of a reservoir flow unit or perforated interval. Permeable, cross-bedded sand bundles are separated by low-permeability, inclined and horizontal mud-silt layers and lenses present along bed-set boundaries. Heterogeneity level 6 is individual sand laminae (grain-flow lenses or grain-fall sheets) separated by textural variations (and hence permeability-porosity variations) and isolated mud-silt laminae.

Permeabilities range from 90-160 d in sand; several millidarcys to 50 d in muddy sand, silt, and sandy silt beds from the levee, crevasse, and abandoned-channel fill; and less than 10 md in muddy silts and muds from abandoned-channel and chute-fill mud sheets and laminae.

At all levels within a fluvial meander-belt system, these permeability heterogeneities are the principal controls on productivity throughout the life of a reservoir.