About This Item

Share This Item

The AAPG/Datapages Combined Publications Database

AAPG Bulletin

Abstract

AAPG Bulletin, V. 102, No. 4 (April 2018), P. 691-708.

Copyright ©2018. The American Association of Petroleum Geologists. All rights reserved.

DOI: 10.1306/0605171619617050

Pore pressure prediction while drilling: Three-dimensional earth model in the Gulf of Mexico

Fausto Mosca,1 Obren Djordjevic,2 Thomas Hantschel,3 Jim McCarthy,4 Ana Krueger,5 Dave Phelps,6 Tayo Akintokunbo,7 Thorsten Joppen,8 Klaas Koster,9 Michael Schupbach,10 Kenneth Hampshire,11 and Andy MacGregor12

1Murphy Exploration & Production Company, 9805 Kathy Freeway, Suite G-200, Houston, Texas 77024; [email protected]
2Newfield, 4 Waterway Square Place, Suite 100, The Woodlands, Texas 77380; [email protected]
3Schlumberger, Ritterstraße 23, 52072 Aachen, Germany; [email protected]
4Murphy Exploration & Production Company, 9805 Kathy Freeway, Suite G-200, Houston, Texas 77024; [email protected]
512710 Sandri Lane, Houston, Texas 77077; [email protected]
6Retired, 19306 Allview Lane, Houston, Texas 77094; [email protected]
7Software Integrated Solutions (SIS) Schlumberger, 5599 San Felipe, Houston, Texas 77056; [email protected]
8Software Integrated Solutions (SIS) Schlumberger, Ritterstraße 23, 52072 Aachen, Germany; [email protected]
9Occidental Oil Co., 5 Greenway Plaza, Suite 110, Houston, Texas 77046; [email protected]
10Murphy Exploration & Production Company, 9805 Kathy Freeway, Suite G-200, Houston, Texas 77024; [email protected]
11Murphy Exploration & Production Company, 9805 Kathy Freeway, Suite G-200, Houston, Texas 77024; [email protected]
12Software Integrated Solutions (SIS) Schlumberger, Ritterstraße 23, 52072 Aachen, Germany; [email protected]

ABSTRACT

Subsalt Gulf of Mexico deep-water wells routinely cost in excess of $100 million. A reliable pore pressure prediction can translate into considerable savings in terms of drilling costs and safety. Traditional methods used to determine pore pressure are based on either logs (e.g., Eaton’s or Bowers’ methods) or seismic data (e.g., calibrated seismic velocities, acoustic impedance). Another method for pore pressure prediction is based on basin modeling: building a three-dimensional earth model and simulating the processes of pressure formation, through geologic time. Recent advancements in basin modeling, such as the coupling of stress and pressure and the implementation of models for mineral diagenesis and rock failure, have significantly improved its applicability. However, no single method is commonly accepted as better than another, therefore, using, comparing, and integrating all three methods together in a predrilling project can provide a higher degree of confidence for pore pressure prediction.

The purpose of this paper is to describe a new approach to pore pressure prediction that combines the above methods with petroleum system modeling.

A special emphasis is put on the explanation of the basin modeling workflow. The first step of the workflow is to create and calibrate a regional model based on a set of regional maps with the main goal of providing the regional context. The second step is to create a smaller area of interest (AOI) model using high-resolution structural and facies maps. This refined model is then used for pore pressure prediction at the prospect scale. The smaller AOI model, albeit at very high resolution, allows a model to be run overnight, so that pore pressure can be predicted ahead of the drilling bit. Finally, the predicted pore pressure and fracture gradient allow the drilling engineer to optimize well performance and reduce drilling costs.

Pay-Per-View Purchase Options

The article is available through a document delivery service. Explain these Purchase Options.

Watermarked PDF Document: $14
Open PDF Document: $24

AAPG Member?

Please login with your Member username and password.

Members of AAPG receive access to the full AAPG Bulletin Archives as part of their membership. For more information, contact the AAPG Membership Department at [email protected].

<