About This Item

Share This Item

The AAPG/Datapages Combined Publications Database

AAPG Bulletin

Abstract

DOI: 10.1306/0711171612816514

Geologic and resource assessment of the Upper Devonian Grosmont and upper Ireton Formations, central Grosmont shelf complex, Alberta, Canada

Stacy C. Atchley,1 Scott C. James,2 Hunter Harlow,3 Caitlin Leslie,4 Jiajun Jiang,5 Gabriella Carrelli,6 Warren Bindon,7 and Jessica Beal8

1Department of Geosciences, Baylor University, One Bear Place #97354, Waco, Texas 76798-7354; [email protected]
2Departments of Geosciences and Mechanical Engineering, Baylor University, One Bear Place #97354, Waco, Texas 76798-7354; [email protected]
3Department of Geosciences, Baylor University, One Bear Place #97354, Waco, Texas 76798-7354; [email protected]
4Department of Geosciences, Baylor University, One Bear Place #97354, Waco, Texas 76798-7354; [email protected]
5Department of Geosciences, Baylor University, One Bear Place #97354, Waco, Texas 76798-7354; [email protected]
6GLJ Petroleum Consultants, 4100, 400-3rd Avenue SW, Calgary, Alberta T2P 4H2, Canada; [email protected]
7GLJ Petroleum Consultants, 4100, 400-3rd Avenue SW, Calgary, Alberta T2P 4H2, Canada; [email protected]
8P.O. Box 883, Stn. M, Calgary, Alberta AB T2P 216, Canada; present address: Crescent Point Energy 2000, 585-8th Avenue SW Calgary, Alberta T2P 1G1, Canada; [email protected]

ABSTRACT

The Devonian Grosmont and upper Ireton (GUI) Formations of northeastern Alberta contain between 300 and 574 billion bbl of in situ bitumen. The GUI stratal succession shallows upward and is partitioned into five progradational, shallow marine sequences. Although matrix porosity is highest within intertidal deposits (commonly 20%–30%), matrix permeability is similar for subtidal and intertidal facies (commonly 10–3000 md). Reservoir zones are 29–98 ft (9–30 m) thick and from oldest to youngest include the A1, A2, B, C1, C2, D1, D2, D3, and upper Ireton. Because of truncation beneath the sub-Cretaceous unconformity, the GUI thins from 656 ft (200 m) within the western part of the study area to an erosional edge within the easternmost part. Intertidal facies most commonly underlie the sub-Cretaceous unconformity and are commonly karsted. Karst breccia and associated fractures occur within thin (3–20 ft [1–6 m]) intervals that are parallel to bedding and most abundant in proximity (164–328 ft [50–100 m]) to the unconformity. Within the study area bitumen is concentrated above 475 ft (145 m) above sea level, and in-place bitumen is estimated at 58 billion bbl (9.2 × 106 m3); the greatest in-place bitumen volume (66%) is associated with the D2, D3, and upper Ireton intervals. A proof-of-concept numerical model evaluates the potential effectiveness of steam-assisted gravity drainage enhanced oil recovery within the GUI. The model suggests bitumen recovery as high as 189,000 bbl over a 20-yr period with an injector–producer spacing between 33 and 41 ft (10 and 12 m).

Pay-Per-View Purchase Options

The article is available through a document delivery service. Explain these Purchase Options.

Watermarked PDF Document: $14
Open PDF Document: $24

AAPG Member?

Please login with your Member username and password.

Members of AAPG receive access to the full AAPG Bulletin Archives as part of their membership. For more information, contact the AAPG Membership Department at [email protected].