About This Item

Share This Item

The AAPG/Datapages Combined Publications Database

GCAGS Transactions

Abstract


Gulf Coast Association of Geological Societies Transactions
Vol. 27 (1977), Pages 41-43

Critical Previous HitWaterNext Hit Estimates for Gulf Coast Sands

Raymond J. Granberry (1), Dare K. Keelan (2)

ABSTRACT

Hydrocarbon productive sands in the Gulf Coast area exhibit wide variances in formation Previous HitwaterNext Hit Previous HitsaturationNext Hit (Sw). Values ranging from 10 to 70 percent pore space are common. These variances are related to the capillary properties of the sand, height above the Previous HitwaterNext Hit level, fluid interfacial tensions, and density difference of the entrained fluids. This formation Previous HitwaterNext Hit may, or may not flow in appreciable quantities, depending on the Previous HitwaterNext Hit retentive characteristics of the rock, the formation relative permeability and fluid viscosities. The combined influence of these variables results in a critical upper limit for formation Previous HitwaterNext Hit Previous HitsaturationNext Hit, above which a significant percentage of Previous HitwaterNext Hit will be produced. This limiting Previous HitwaterNext Hit Previous HitsaturationNext Hit exceeds the irreducible Previous HitsaturationNext Hit value and has been called the critical interstitial Previous HitwaterNext Hit (Sciw). It can be correlated with the basic rock properties of permeability and porosity.

Presented herein is a generalized correlation of critical interstitial Previous HitwaterNext Hit saturations for Gulf Coast sands. This correlation allows a critical Previous HitsaturationNext Hit to be estimated from permeability and porosity data given in a routine core analysis report. Higher critical Previous HitwaterNext Hit saturations are found as porosity increases in samples of constant permeability. Higher values are also noted as permeability decreases in samples of constant porosity. The critical interstitial Previous HitwaterNext Hit Previous HitsaturationNext Hit also influences the interpretation of the quick-look computer calculated apparent Previous HitwaterNext Hit resistivity (Rwa) curve used to predict hydrocarbon productive zones. The Rwa/Rw multiple of three which is commonly used to indicate hydrocarbon production corresponds to a Previous HitwaterNext Hit Previous HitsaturationNext Hit of 58 percent of pore space. Low permeability zones may yield hydrocarbons with a Rwa multiple of two, which corresponds to a Previous HitwaterNext Hit Previous HitsaturationNext Hit of 70 percent. High permeability sands may require multiples of six or more to be hydrocarbon productive. The required multiple for a sample of any given permeability and porosity can be estimated from the generalized correlation of critical Previous HitwaterTop values presented.


Pay-Per-View Purchase Options

The article is available through a document delivery service. Explain these Purchase Options.

Watermarked PDF Document: $14
Open PDF Document: $24