About This Item

Share This Item

The AAPG/Datapages Combined Publications Database

AAPG Special Volumes

Abstract

AAPG/Datapages Discovery Series No. 7: Multidimensional Basin Modeling, Chapter 11: Structural Trap and Previous HitFaultNext Hit-Previous HitsealNext Hit Analysis, Offshore Myanmar: A Case Study, by Davies, R. K., L. An, D. A. Medwedeff, D. Yarwood, p. 161–175.

AAPG/Datapages Discovery Series No. 7: Multidimensional Basin Modeling, edited by S. Duppenbecker and R. Marzi, 2003

 

11. Structural Trap and Previous HitFaultNext Hit-Previous HitsealNext Hit Analysis, Offshore Myanmar: A Case Study

R. K. Davies,1 L. An,2 D. A. Medwedeff,3 D. Yarwood4

1Rock Deformation Research USA, Inc., McKinney, Texas, U.S.A.
2Consultant, Flower Mound, Texas, U.S.A.
3Chevron Petroleum Technology Company, San Ramon, California, U.S.A.
4BP, Houston, Texas, U.S.A.

ACKNOWLEDGMENTS

We thank Willam F. Dula Jr. and two anonymous reviewers for edits that improved the manuscript and ARCO for permission to publish the results.

ABSTRACT

The objectives of this study are to (1) describe the prospect trap style in Block M-9 near the continental shelf break offshore Myanmar in the Gulf of Martaban, (2) analyze the geometry and sealing mechanisms and risks for Previous HitfaultNext Hit S1, and (3) use these results as a calibration for trap style and Previous HitfaultNext Hit-Previous HitsealNext Hit risks on additional prospects in the block. Previous HitFaultNext Hit S1 is a key trapping component to seven prospective hydrocarbon accumulations of which six are delineated by anomalously bright seismic amplitudes interpreted from 3-D seismic data in the footwall of the Previous HitfaultNext Hit. All six anomalies correlated with mud log gas peaks during the drilling of the exploration well Shwe Pyi Htay-1 (SPH-1) in 1997. Only one anomaly (DHI 6), however, tested recoverable gas reserves.

We analyzed the Previous HitsealNext Hit potential of Previous HitfaultNext Hit S1 using an ARCO-proprietary, PC-based Previous HitfaultNext Hit-Previous HitsealNext Hit analysis program integrated with 3-D visualization techniques. Previous HitFaultNext Hit-Previous HitsealNext Hit potential (FSP) is a parameter determined from the Previous HitfaultNext Hit geometry, the throw distribution, and the reservoir quality adjacent to the Previous HitfaultNext Hit surface that indicates the likelihood of a Previous HitfaultNext Hit to Previous HitsealNext Hit hydrocarbons. The results indicate that the Previous HitfaultNext Hit has high Previous HitsealNext Hit potential (65%) in the upthrown DHI 6 sand interval and lower Previous HitsealNext Hit potentials (30–45%) in the other prospective sand intervals. These results agree with the drilling results from SPH-1 well and might be applied to other prospects in the same area to assess exploration risk. Our analysis suggests that the gas-water contact (GWC) at the depth of 1497 m (4910 ft) in the upthrown DHI 6 interval may result from gas leakage across the Previous HitfaultNext Hit through a window of low Previous HitsealNext Hit potential along a region of low throw associated with a connecting Previous HitfaultNext Hit splay. If this is the case, then the threshold FSP for the DHI 6 interval is 60%. Another possibility is that the small faults below seismic resolution that intersect the S1 Previous HitfaultNext Hit control the GWC. If this is true, the threshold FSP would be lower than 60% but higher than 45%, which is the lowest Previous HitsealTop potential calculated in the remaining reservoir intervals with residual gas.

Pay-Per-View Purchase Options

The article is available through a document delivery service. Explain these Purchase Options.

Watermarked PDF Document: $14
Open PDF Document: $24