About This Item
- Full text of this item is not available.
- Abstract PDFAbstract PDF(no subscription required)
Share This Item
The AAPG/Datapages Combined Publications Database
Houston Geological Society Bulletin
Abstract
Abstract: Seismic Stratigraphic Expression
of Submarine Fans
By
This paper presents criteria for recognizing ancient submarine fans from seismic data, and illustrates examples of seismically defined fans as well as common "pitfalls" of fan interpretation. Submarine fans usually can be recognized seismically by morphology and by position in the overall paleogeographic setting. Submarine fans are commonly related genetically and spatially to canyons or other sediment transport paths across the outer shelf and slope, although some "canyons" may be poorly developed or far removed from the fan. Most sands in fans are deposited as turbidites, although grain-flow, inertia-flow, slump, and other mass-transport processes probably contribute to the fan. The mounded fan shape is due to concentration of material by the funneling action of the canyon system, and to changes in gradient within the canyon. Differential compaction may accentuate mounding. Bathymetry of the depositional site strongly controls fan shape.
On seismic
reflection
profiles, the canyon-fan system can
be separated into the canyon, lower fan, upper fan, and later
canyon fill. The canyon is an elongate, commonly erosional,
notch that serves as a sediment transport path across the shelf
edge. After fan deposition, the canyon is filled with a prograding
shale-prone configuration that has an onlap-fill transverse
profile. The seismic character of the sand-prone lower fan is
a mound shape with a convex-upward upper surface. The
internal
reflection
pattern is basically that of convex-upward
reflections that downlap and terminate toward the fan edge,
and define internal lobes and depositional axes within the fan.
The upper fan consists of one or a few thick, sand-prone
channels flanked by large, mostly silt- and shale-prone levees
that become smaller downdip. Upper fan seismic criteria
include concave-upward upper surfaces of levees sloping from
the central channel, bidirectional downlap of concave-upward
internal reflections, and "bow-tie" diffractions at channel
edges. An irregular moundy
reflection
pattern is commonly
interpreted as a complex of leveed channels. Although current
modern sedimentological models assume contemporaneity of
upper and lower fans, much of the upper fan commonly
appears seismically to be younger than the main part of the
lower fan. The surface separating upper and lower fans is
commonly characterized by downlap or onlap of the upper fan
onto the lower fan. This superposition probably occurs because
early phases of fan deposition are most likely to be dominated
by coarse clastics deposited in the lower-fan facies, while later
phases are likely to be characterized by silty to shaly clastics
deposited in upper fan levees.
Eustatic falls and lowstands of sea level are times of preferential deposition of submarine fans. During eustatic falls, canyons are cut, shelf areas are bypassed by sediments, and coarse clastics are depositied in sand-prone lower fans at canyon mouths or directly on the slope or basin plain. During lowstands, upper fans and other slope-fill sequences follow. With rise of sea level, canyons are filled predominantly with fine-grained material.
End_of_Record - Last_Page 2---------------