About This Item
- Full text of this item is not available.
- Abstract PDFAbstract PDF(no subscription required)
Share This Item
The AAPG/Datapages Combined Publications Database
Houston Geological Society Bulletin
Abstract
Abstract: A 3D
Seismic
Volume of a Major Buried Thrust Front,
Foredeep to Emergent Thrust Sheets, Quiriquire Block:
Platform for Improved Exploration and Production, Eastern Venezuela Basin
![Previous Hit](/data/images/arrow_left.gif)
![Next Hit](/data/images/arrow_right.gif)
By
1Maxus Venezuela, Dallas
2YPF/ Maxus
3Sievers Consultant
Summary
Sizeable 3D seismic
surveys over buried thrust fronts
provide the start of a full 3D work process that greatly
improves the exploration and production efforts of multiple
plays in complex geologic trends in order to maximize their
profitability. This full 3D platform not only improves
seismic
imaging and interpretation, but allows continuous 3D
analysis of the projects, from structural,
modeling
and mapping,
to cost reduction efforts for well and development
programs, to stratigraphic, structural, and fracture
modeling
input for full field simulation and in-till drilling. For this 3D work process
to effectively function and have positive impact on the E&P bottom line, it is
essential that there is interaction of all disciplines throughout the project life and
continuity of experienced, highly motivated team members.
Introduction
YPF/Maxus and its partners have achieved a full 3D
image of a buried thrust front in one of the most prolific
hydrocarbon-bearing trends in the world with two merged
3D seismic
surveys totaling 550 km2 of surface coverage
(excluding overlap). This 3D volume covers a series of
stacked thrust sheets, which form the eastward continuation
of the Furrial Field complex in the Eastern Venezuela Basin.
These data and the interpretive products were performed as
a part of our technological commitment to Lagoven in the
service contract of the Quiriquire Block, awarded to Maxus
in the 1993 Second Marginal Field Bid Round. The technical
drivers that helped determine an aggressive bid on this
block were:
- proven basin with prolific hydrocarbon charge from the world-class Tethyan Cretaceous source rock in a "cool" thrust front setting with a low geothermal gradient,
- multiple reservoir objectives that help mitigate the increasing reservoir quality risk on this east side of the basin,
- evidence of reasonable amounts of quartz arenite sand systems which tend to retain effective permeability with depth,
- evidence for a continuation of the Furrial and Orocual structural trends into the block with large thrust-induced anticlines (Viboral in particular),
- a structural model which supported well-developed 4-way closure in spite of
the difficult, low-resolution
2D
seismic
.
The interpretation and mapping of the poorly imaged
Viboral structure, in particular, was key. Many companies
interpreted this structure as a continuation of the Furrial-
Boqueron trend, but the depth of the first major reservoir
interval and the size of the structure marked the difference
between an aggressive or moderate bid. A 3D survey was
part of the Maxus bid in order to help ease the concerns on
reservoir target depth and the size and detailed geometry of
the structural closure. Reservoir quality, however, loomed as
the most serious risk and, due to the low frequency of the
seismic
at these great depths, only the drill bit reveals
these answers.
The first survey, the Viboral 3D, was acquired in 1994
and represents one of the first exploratory 3D seismic
sets
in Venezuela. The second survey, the Quiriquire Norte 3D,
was completed in 1997 to the north of the first survey and
has both exploration and development objectives. The surveys
were designed with sufficient apertures to adequately
migrate and image a full interpretive view of this complex,
stacked thrust front.
End_Page 16---------------
Viboral 3D (Southern Survey): 1994-5, 325 km2, 8-Second Record Length; Dynamite Source
The primary target of the southern survey lies in the deep Viboral thrust structure at 16,000 to 20,000 feet, into which the San Luis-Lagoven-1X discovery well was drilled in 1996, followed by the SLL-2X well this year. The survey also included a shallower secondary objective in the syntectonic Carapita sands on the backlimb of the Viboral thrust structure, in part prompted by the Cachipo wells of the 1950's which proved that the upper Carapita sands were marginally productive out of thin syntectonic sands.
Quiriquire Norte 3D (Northern Survey): 1996-7, 244 km2, 7-Second Record Length; Dynamite (92%) & Vibroseis® (8%) Sources
The northern survey was much more difficult to design and acquire owing to the diversity of objectives at varying depths and the more difficult surface conditions (rugose topography, outcrops, culture, and Quiriquire Field infrastructure). Target depths range from around 2,000 to 15,000 feet. This wide range is due primarily to the stacked nature of this imbricated thrust front and our desire to include the Quiriquire Shallow Field with its post-thrust alluvial reservoir section.
Geologic Setting and 3D Survey Objectives
The principal objective section of the combined surveys ranges from greater than 18,000 feet in the south, as the target section descends into the foredeep, to the partially emergent and outcropping thrust sheets in the north which form the transition into the Serrania del Interior. This sequence of thrust sheets consists of Paleogene and Cretaceous reservoir-prone formations that ride on, or detach with, the prolific Cretaceous Querecual source rock. After the majority of the compressional deformation in the Miocene, these thrusts were rapidly buried under the sealing syntectonic Miocene Carapita, Mio-Pliocene La Pica, and the post-thrust, monoclinal Plio-Pleistocene Quiriquire Formations. This burial effectively hides the immense underlying dimensions of five major thrust sheets, which can have displacements of greater than 5,000 feet and a combined structural relief of well over 20,000 feet. To the north, the Quiriquire alluvial sequence holds the historic Quiriquire Field, a stratigraphic accumulation of nearly 4 billion barrels of oil in place, 760 MMB of which have been recovered to date (about 15° API). Under this shallow monoclinal deposit lies the Quiriquire Deep Field, a long-known productive thrust anticline in the third thrust sheet of the buried thrust front succession.
It is important to realize why this thrust front tends to develop pronounced anticlines with well-developed four-way closure. Part of this deformational pattern is due to the nature of the stratigraphic succession in this foredeep basin and the resulting fault and fold geometries. In particular, the undercompacted, ductile, and shale-prone nature of the Carapita molassic section, which was rapidly deposited over the competent pre-thrust section, has a profound effect on the hanging wall and leading-edge geometries. Thus, thrust faults in this trend are considered to ride on basal detachments in the Cretaceous Querecual or deeper shale sections, ramp through the massive sand-prone layers of the Upper Cretaceous and Paleogene, and detach into freshly deposited Miocene Carapita section. This defines large-scale flat-ramp-flat geometries that tend to form extremely well-developed anticlines with long, steep forelimbs and good structural closures. This fold style may be most pronounced in buried thrust fronts where the upper detachment levels emerge into unconsolidated, shale-prone or even starved basin settings. Thus, for this and other reasons, fault and fold style can change through time during the evolution of a thrust system, and can determine differences in the degree of trap risk and structural definition of the prospect portfolio
3D Seismic
Target Summary: Five Stacked Thrust Sheets
The entire Quiriquire-Viboral stacked imbricate thrust front affords at least five major target thrust sheets, consisting of the following sequence, from south (deep) to north (shallow):
- Viboral thrust sheet, 16,500 to 25,000 feet,
- Second step thrust sheet, 12,000 to 15,000 feet,
- Quiriquire deep thrust sheet, 6,000 to 11,000 feet,
- 609 thrust sheet, from around 4,500 to 8,000 feet and covering a smaller area
- Northern thrust sheet, which actually consists of a series of more diversely deformed sheets and fault blocks at around 2,000 to 6,000 feet.
Each thrust sheet contains huge fold structures with 1,500 to 4,000 feet of vertical relief, 10 to 15 kilometers in length and some 3 to 6 kilometers in width. The flanks of these structures typically reach 45° angles and greater. Thus, the 3D survey designs took into account not only the necessary migration apertures, but also factored in what might be referred to as "interpretation aperture" in order to ensure sufficient lateral image of this low-angle thrust environment with the diagnostic forelimb, backlimb, footwall, hanging wall, lateral ramp and tear fault features.
End_Page 17---------------
Examples of Exploration and Delineation Wells Based on 3D
Sun Luis-Lugoven-1X Well: Viboral Thrust Sheet (Actual Total Depth: 19,165 feet)
Deep Thrust Anticline
The main work commitment of the Quiriquire Block
service contract for Lagoven was the drilling of the deep
exploration well, SLL-1X, on the principal deep thrust anticline
of Viboral, the next structure in the eastward continuation
of the prolific Furrial to Boqueron trend. As one of
the deepest wells in the trend, it required large amounts of
pre-planning and full multi-discipline coordination, taking
into account Lagoven's considerable experience. We elected
to first shoot a sizable exploratory 3D seismic
survey in
1994 for a number of reasons. Some of the prominent factors
were:
- the original 2D
seismic
provided a very low-resolution image of the Viboral structure, and it was considered likely that part of the problem could be solved only with a 3D solution,
- a Well-to-3D-seismic cost ratio of greater than two,
- the apparent confirmation of moderate to good reservoir of equivalent age in all nearby fields (to the north, northwest, and west) was considered sufficiently encouraging,
- the need to optimally select the first well location in relation to the absolute crest (possible gas cap),
- the decision to stay away from the complications we might encounter with the numerous secondary faults and possible internal compartmentalization of the Viboral structure, as observed in nearby fields,
- the need to be able to quickly evaluate the results of the first well in the context of the entire prospect,
- the need to quickly select the optimal second well location based on the results of the first well.
The results of the Viboral exploration 3D survey were
excellent (parameters to be given) and clearly showed the
large dimensions of a thrust anticline with nearly 4,000 feet
of closure. A comparison between the original 2D and the
3D seismic
illustrates remarkable improvement. With a
high-quality 3D data set, it was possible to be selective in
terms of these and other location criteria.
Not only is the crest and classic fault bend fold feature
clearly imaged, but the steep forelimb, internal faults and
fold geometry, lateral ramps, tear faults, footwall, and even
the subthrust segments are all exceptionally imaged, especially
considering the depth and the resulting low frequency
of the data. The quality of the 3D data also provided a
way to continuously "view" the d&g progress in the troublesome
overlying La Pica and Carapita section, especially
with the critical casing points near the top and base of overpressure
(10,300 and 16,500 feet [MD] in the first well).
Detailed analysis and treatment of the 3D seismic
velocities
helped provide accurate depth prognoses, casing depths,
and contingency plans.
The second well, San Luis-Lagoven-2X, is currently
being drilled. Greatly aided by the 3D data, this second well
was positioned at a structural level in context with the
results of the first well and on the basis of 3D cumulative
dilational strain modeling
, which will allow a contingency
high-angle borehole to optimally intersect the predicted
fracture sets for improved effective permeability.
Cachipo-6X Well: Overlying Backlimb of "Viboral Thrust Sheet" (Actual Total Depth: 16,077 feet [MD]) Syntectonic Carapita Play
The second well commitment of the Quiriquire service
contract was the Cachipo-6X well, which targeted seismic
amplitudes within the 3D volume in the syntectonic
Miocene Carapita section over the backlimb of the Viboral
thrust anticline. The general nature of this play is considered
to be a deeper analogue to the proven play-types in
the trend, which can be described as stratigraphic accumulations
within small piggy-back sub-basins on the backlimbs
of the underlying thrust anticlines. The prospect concept
was that these amplitudes were sand-prone units of several
thousand feet which were laid down within an extensional
End_Page 18---------------
slump block above Viboral's backlimb as the unconsolidated syntectonic sediments rotated and collapsed during the growth of the thrust anticline. The Cachipo wells, which were drilled into the shallower Carapita level during the 1950s, proved that some of these types of sands had been charged with light oil. The results of the Cachipo-6X well showed a predominance of siltstone, with insufficient reservoir quality sandstone.
Tropical- 1X Well: "Second Step Thrust Sheet" (Planned Total Depth: 14,865 feet [MD]) "Hidden" Imbricate Thrust Sheets
One of the immediate results of the Quiriquire Norte
3D, even with its fast-track version, was the imaging of a
hidden Imbricate on the "Second Step Thrust Sheet" which
the previous 2D seismic
survey had not succeeded in
resolving. Even with the new 3D data in mind, it is difficult
to pick out the position and geometry of this extra thrust
imbricate on the 2D
seismic
. The 2D
seismic
data show
only a "smeared" image of these overlapping sheets and
does not resolve the top of the principal thrust sheet as it
"disappears" under the overlying imbricate. Thus, the 2D
data show only a small structure with regional dip. The 3D
data, however, clearly show that this structure continues
under the upper imbricate, thereby gaining considerable
structural relief. This difference in structural interpretation
is significant because the prospect increases from a few
hundred feet to 1,500 feet of structural closure with a fourfold
increase in area. This prospect is scheduled to be
drilled by the Tropical-1X well this year.
QQ-685: Delineation We11 of the Quiriquire Deep Oil Rim with a Follow-up Horizontal Well (Planned Totul Depths: 10,300 [MD] feet +2000-foot Horizontal Leg)
The Quiriquire Deep Field was discovered below the stratigraphic Quiriquire Shallow Field in 1952 with a gas blowout that later proved to be part of a gas column of around 2900 feet with an additional 500 to 700+ feet of oil rim under the gas. With the 3D control, the QQ-685 well will target this oil rim, offsetting the prolific QQ-676 well. Although the oil column is relatively thick, the steep flanks of the anticline make the 100-foot-thick Oligocene Los Jabillos reservoir a difficult target. After gaining the necessary structural and stratigraphic control from a vertical pilot hole, a separate well will be drilled with a 2000-foot horizontal leg through the 100-foot-thick Oligocene reservoir, parallel to the oil/water contact. Once positive results are obtained from the QQ-685 well, further development wells and a gas cycling project will follow.
3D Platform and Multi-Discipline Team Aspects: Risk Assessment and Optimization of Complex Projects
One of the principal benefits of this sizeable 3D seismic
volume is that it established a platform from which many
other aspects and disciplines could continue to evolve in a
3D framework, including:
![Previous Hit](/data/images/arrow_left.gif)
![Next Hit](/data/images/arrow_right.gif)
![Previous Hit](/data/images/arrow_left.gif)
![Next Hit](/data/images/arrow_right.gif)
![Previous Hit](/data/images/arrow_left.gif)
![Next Hit](/data/images/arrow_right.gif)
![Previous Hit](/data/images/arrow_left.gif)
![Next Hit](/data/images/arrow_right.gif)
It is essential that there is continuous interaction of all disciplines and individual team members for this 3D work process to properly function and maximize the profitability of these complex geologic trends.
Technical Risks: Reservoir Quality and Hydrocarbon Phase
Because of the extremely favorable petroleum system in the Eastern Venezuela Basin and the large size of the thrust structures (1,500-4,000 foot closures, perhaps filled to spill), the most serious technical risk is reservoir quality. The other important prospect risk is the hydrocarbon phase, which varies considerably throughout the trend from gas
End_Page 19---------------
condensate, to volatile oil, medium-gravity undersaturated oil and heavy oil to even tar. Tar mats can occur not only due to biodegradation, but also owing to asphaltene dropout at great depths. In many cases, of course, the hydrocarbon phase and reservoir risks are intimately coupled because, for example, some low-quality reservoirs produce due to the high mobility ratio of that structure's unique hydrocarbon phase and high reservoir pressures, whereas in other structures, better quality reservoirs fad to effectively produce owing to somewhat heavier gravity crudes. Our evaluation and approach to the reservoir risk is considered to be one of the most challenging technical problems we face in the frontier areas of the Eastern Basin and as deeper and more subthrust plays are pursued throughout the basin. Solutions with respect to reservoir risks are likely to include:
- Finding technology that increasingly improves the
seismic
resolution in order to enable more accurate stratigraphic prediction. This includes understanding the regional stratigraphic framework, especially for predicting the depositional trends of quartz arenite systems which maintain highly efficient pore networks even in the low-porosity ranges of 4 to 10% (most recently O'Leary et. al., 1997, Simposio Bolivariano, Memorias Tomo I, p. 163-6).
- Understanding reservoir characteristics via
modeling
of the depositional geometries, petrography, fluid inclusions, fractures, and the timing of cementation. This information can bring to light ways of enhancing reservoir performance, including making use of natural fractures by successfully predicting fracture orientation, density, aperture, and effective permeability ranges.
- Implementing drilling and completion techniques that minimize the formation damage of low-permeability reservoirs and optimize artificial fracturing techniques, perhaps in combination with the natural fractures.
- Optimizing techniques to reduce production limitations owing to such things as condensate banking, reservoir pressure and fluid viscosity limitations, and hydrocarbon phase complications such as asphaltene flocculation.
Conclusions
The 550 km2 combined Quiriquire-Viboral 3D seismic
volume
provides coverage over an entire buried thrust front
and is one of the first in what we believe will be an industry
trend to increasingly use 3D technology to optimize the
exploration and development of complex geologic trends.
Rather than yielding an image of a single structure, this 3D
volume provides a unique, continuous view of the geometry
and development of stacked and buried thrust fronts, from
the deep thrust anticlines encroaching the foredeep to the
highly elevated and partially eroded emergent thrust sheets
that form the outer ramparts of the Serrania del Interior.
The huge 1,500 to 4,000-foot thrust structures form a
stacked imbricate sequence of Paleogene and Cretaceous
reservoir-prone section, underlain by world-class
Cretaceous Querecual source rock and draped by excellent
Miocene Carapita seal, all of which provide the economic
incentive to undertake such extensive 3D efforts. Reservoir
quality looms as the most serious threat to the successful
outcome of projects in this trend. In tandem with reservoir
quality, hydrocarbon phase can also be a limiting factor.
Finding solutions and achieving success in regard to reservoir
quality is one of industry's greatest challenges as the
proven reservoir systems are pursued into the less known
areas. Optimum success will depend upon our industry's
ability to deal with low-porosity and fracture-enhanced
reservoir systems. Thus, it is even more critical that the
other technical risks, such as structural definition, are efficiently
assessed by using advanced concepts within a robust
3D framework.
The Quiriquire-Viboral 3D seismic
volume acquired
over this Eastern Venezuela buried thrust front allows continuous
3D treatment and analysis of the projects, from
structural and stratigraphic
modeling
to drilling and reservoir
simulation, Thus, the 3D platform is not only for structural
interpretation and visualization, but also 3D
fracture/strain analysis, stratigraphic
modeling
, borehole
planning-including high-angle and horizontal drilling-on-
the-fly adjustments while drilling, well and prospect
evaluation, reservoir simulation, early and optimum reservoir
pressure maintenance programs, and finally, secondary
sweep programs with in-fill drilling. The benefits include
more accurate well planning and drilling programs that provide
one of the best ways to reduce individual well and
total development costs, while minimizing the chances of
missing productive fault compartments, especially in the
case of "hidden" low-angle imbricates. This becomes even
more critical when facing complex fluid phase changes and
thin oil rims which demand precise imaging, targeting,
drilling, and evaluation.
The scope and economic implications of these complex projects require a realistic understanding of how all this must fit together into seamless project phases in which continuous interaction of all disciplines and the individual team members throughout the course of these projects is essential. We trust that the results of the Quiriquire-Viboral project, with continued full implementation of this team process, will have important implications for the future exploration and production efforts in the Eastern Venezuela Basin, especially in its more frontier areas such as to the east in Guarapiche and in the progressively deeper and subthrust positions throughout the basin.
End_Page 20---------------
Acknowledgments
The authors are grateful to YPF/Maxus, Lagoven, and our other partners, BP-Venezuela and Otepi, for their permission to present this talk. The list of contributors to this part of the Viboral and QQ North project is incomplete without Martin Emery, Les Niemi, Dave Rolling, Qingming Yang, Jean Jew, Jeff Ventura, Carl Burgman, and David Miller. We appreciate and always will remember their contributions to the Maxus Venezuela effort. We are more than grateful to the patience and diligence on the part of our drilling engineers, in particular, Doug MacAfee and John Bell.
We are grateful to Mike Giambra for his high-quality acquisition monitoring and the many ways in which he went the extra mile.
We wish to acknowledge the quality of effort and work product provided by Western Geophysical (Venezuela, Dallas, Houston, Denver) during the past 3 years of acquisition and processing.
Special thanks go to Lagoven staff and managers for providing their experience in the trend and facilitating the progress of the Quiriquire Block effort.
We thank Ray Young for his helpful review of this extended abstract on such short notice.
End_of_Record - Last_Page 21---------------