About This Item
- Full text of this item is not available.
- Abstract PDFAbstract PDF(no subscription required)
Share This Item
The AAPG/Datapages Combined Publications Database
Houston Geological Society Bulletin
Abstract
Abstract: Low-Resistivity, Low-Contrast Pays
By
Consulting Engineer
Major hydrocarbon accumulations have been produced over
the past 40 years in low resistivity, low contrast (LRLC)
sands in the Gulf of Mexico basin (GOM). LRLC reservoirs were
commonly considered wet, high, misidentified as shale, or completely
overlooked because of logging tool resolution limitations,
but are being re-evaluated now in other basins. Low-resistivity pay
has been typically defined at or below the 1.0 ohm-meter resistivity
level, yet many productive reservoirs are found in the 0.3 to 0.5
ohm-m resistivity range. The interpretation of seismic
response,
the analyses of drill cuttings, sidewall and conventional cores, the
interpretation of log response with the application of appropriate
petrophysical models, along with wireline and production testing,
provide an integrated LRLC evaluation. In addition to many U.S.
basins, LRLC sands are found in basins in Canada (Alberta),
North Sea, Egypt, Nigeria, Malaysia, Indonesia, Australia,
Philippines, Italy, Mexico, Trinidad, Venezuela, Ecuador,
Argentina, and Russia.
Geological causes of LRLC pay include: laminated dean sands with shales; silts or shaly sands; clay-coated sands; glauconitic sands; sands with interstitial dispersed clay; sands with disseminated pyrite or other conductive minerals; clay-lined burrows; clay clasts; altered volcanic/feldspathic framework grains; very fine-grained sands; microporosity; or sands with very saline formation water. LRLC depositional systems include deepwater fans with levee-channel complexes, delta front and toe deposits, shingle turbidites, and alluvial and deltaic channel fills. The lack of high-resolution logging across intervals containing reservoir sands that are below the tool resolution is frequently the "cause" of the LRLC.
Geological and petrophysical models developed in the GOM
for the evaluation of LRLC pay are applicable to other basins. A
conventional Archie clean sand or Waxman-Smits shaly sand
model is commonly used to evaluate LRLC log anomalies. Often,
shaly sand models are not necessarily suited for LRLC evaluation.
The Archie lithology exponent (m) and saturation exponent (n)
for many LRLC reservoirs can range from 1.4 to 1.85, and from 1.2
to 1.8, respectively. In thinly laminated LRLC reservoirs, net sand
distribution is identified with high resolution logging tools, examination
of rock samples, and interval testing. Recent application of
nuclear magnetic resonance logging has provided a better identification
of fluid type, grain size distribution, and hydrocarbon saturation
in LRLC sands. Resistivity forward modeling
can also aid in
establishing the "true" resistivity in laminated sands.
End_of_Record - Last_Page 11---------------