About This Item
- Full text of this item is not available.
- Abstract PDFAbstract PDF(no subscription required)
Share This Item
The AAPG/Datapages Combined Publications Database
Houston Geological Society Bulletin
Abstract
Abstract: Structural Styles of Passive-Margin Deepwater Provinces
By
Rowan Consulting, Inc.,
Boulder, Colorado
Passive margins with salt or overpressured shale layers typically undergo gravitational failure above the weak detachment. The deepwater, distal provinces are dominated by contractional tectonics that balances proximal extension and downdip translation of the overburden. Failure is driven by a combination of gravity gliding above a basinward-dipping detachment and gravity spreading of a sedimentary wedge with a seaward-dipping bathymetric surface. Continued deformation is driven primarily by shelf and upper slope sedimentation, which maintains the bathymetric slope and the resulting gravity potential, and by increased basinward tilting. Deformation is retarded or halted by distal thickening of the overburden caused by the folding itself or by lower slope and abyssal sedimentation. Differences in deepwater deformation along various passive margins, such as the northern Gulf of Mexico or offshore west Africa, can be explained in part by differences in sedimentation, loading subsidence, thermal subsidence, and cratonic uplift.
Salt is a viscous material with no effective strength, whereas shale
is a frictional material whose strength depends on the amount of
overpressure. This rheological difference has several important
ramifications. First, salt-cored folds are generally symmetrical
with only minor faulting, whereas shale-detached foldbelts
typically comprise asymmetric fault arrays with multiple
detachment levels. Second, deformation above salt usually occurs
immediately, beneath only a thin overburden, whereas shale-based
deformation does not happen until there is a sufficient
thickness of sediment to create overpressured conditions. Third,
the location of salt-cored folds is controlled by the basinward
pinchout of the salt, the toe
of the slope, and thickness variations
within the original salt layer, whereas the location of shale-detached
deformation depends largely on the variable build-up
and release of overpressure over time.
Salt can also reduce the gravity potential of the failing margin in other ways. The bathymetric slope can be decreased by proximal subsidence into salt and distal inflation of salt. The inflated salt, as well as existing diapirs or salt walls, can be squeezed laterally, thereby accommodating significant shortening. This, in turn, drives further diapirism and/or lateral salt extrusion. Extruded salt may amalgamate to form extensive salt canopies, so that subsequent gravitational failure may take place largely on shallow, allochthonous detachments rather than on the autochthonous salt level.
End_of_Record - Last_Page 15---------------