About This Item
- Full text of this item is not available.
- Abstract PDFAbstract PDF(no subscription required)
Share This Item
The AAPG/Datapages Combined Publications Database
Houston Geological Society Bulletin
Abstract
Abstract: The Winds of Change: Anisotropic Rocks—
Their Preferred Direction of Fluid Flow and Their
Associated Seismic Signatures
By
Consultant
Although 20 years ago it was politically incorrect to admit that horizontal permeability anisotropy resulting from aligned connected porosity was linked with seismic anisotropy (azimuthal anisotropy), the winds have changed.
Our industry now has a respectable worldwide effort in research, acquisition, processing, interpretation and modeling that pursues precisely that linkage. The current thought process is that unequal horizontal stresses and/or vertical aligned fractures can provide the aligned, connected porosity that may result in horizontal permeability anisotropy. The presence of vertical aligned fractures and/or unequal horizontal stresses typically causes azimuthal anisotropy.
The earliest efforts pursued the azimuthal variation of PP and SS traveltimes and amplitudes, because these pure-mode seismic waves measurements are the “easiest” measurements our industry can process and interpret, and we believe we understand traveltimes and amplitudes. Thus our documentation of the relationship of azimuthal PP and split shear-wave measurements was founded.
As time went on, the PS modes (P-S1 and P-S2) or the split
C-wave (converted wave—P down and S up) were used to
document the shear-wave anisotropy arising from unequal
horizontal stress and/or vertical aligned fractures.
Now, however, our industry is grappling with what researchers
point out as the “biggest” anomaly that links horizontal permeability
anisotropy to seismic anisotropy—azimuthal variation in
attenuation. However, attenuation has usually received cursory
dismissal.We don’t like “dim zones” being “pay” because (1) they
are “too hard” to map, (2) there are too
many other reasons for dim zones rather
than azimuthal attenuation and (3) attenuation
is too hard to quantify and
attribute to any one cause per se. In the
past, we have often used trace equalization,
AGC, spectral whitening and other
very powerful processing techniques
to remove dim zones. Processors worth
their salt made those pesky dim zones
look nice and bright
and sharp!
In the past, attenuation has been a classic problem and not a “solution” to anything. Now, however, we can glide forward on the next wave of multi-component, multi-mode, multi-azimuth 3D and 4D seismic powered by the winds of change.
End_of_Record - Last_Page 32---------------