About This Item
- Full text of this item is not available.
- Abstract PDFAbstract PDF(no subscription required)
Share This Item
The AAPG/Datapages Combined Publications Database
Houston Geological Society Bulletin
Abstract
Abstract: The Princess Discovery, Sub-Salt Gulf of Mexico:
Challenges of Sub-Salt
Imaging
in a Fast-Paced
Sub-Sea Development
![Previous Hit](/data/images/arrow_left.gif)
![Next Hit](/data/images/arrow_right.gif)
By
Shell Exploration and Production Company
This paper (1) gives a brief overview of the
Princess Field and its setting in the Mars
Basin in the Gulf of Mexico, (2) discusses the
strategy and maturation of the sub-salt seismic
imaging
and (3) analyzes the impact on
the field development.
The Princess discovery is located in 3700 ft of water on the northern flank of the Mars Basin on Mississippi Canyon blocks 765 and 766, adjacent to the Ursa field (Fig.1). Shell is the operator for BP, ExxonMobil and ConocoPhillips. The discovery well, drilled in the year 2000 on a poorly-imaged sub-salt truncation trap, penetrated stacked Upper Miocene turbidite reservoirs.
Given the large uncertainty associated with the sub-salt setting, the development system was chosen to anticipate many different outcomes. This resulted in a four-well, 15,000 psi-capable, dual flowline sub-sea tieback to Ursa, which can be expanded in the future. First production was achieved late 2002 initially through a well drilled to Princess from the Ursa Tension Leg Platform (TLP), followed in late 2003 by the first production through the sub-sea system, some 31⁄2 years after discovery. Challenges that were met during the development not only pertained to the large subsurface uncertainty, but also to the complexity of drilling high-angle extended reach wells through shallow hazard zones and depleted reservoirs. Princess Field is currently (April 2005) producing approximately 45 MBOPD and approximately 95 MMSCFPD through four wells from two different reservoirs.
Princess Field is hidden completely underneath the East Antares
salt body.At the time of discovery, the existing 3D data yielded no
sedimentary details of the field or even the position of the large
Antares salt overhang (Fig. 2). The discovery well was drilled
using a limited depth-migrated long-cable 2D image. A large
range in the estimated discovery volumes reflected the uncertainty
associated with the limitations of seismic imaging
below salt and
the upside potential in untested stratigraphy and a possible waterflood. To support initial appraisal and development activities
the first 3D image was obtained through executing a pre-stack
depth migration (PSDM) on existing 1988 seismic data. This survey
proved to be in a reasonable orientation to illuminate
sub-salt, but lacked the offset range to provide more than a localized
image of the field. Consequently a 3D seismic survey tailored
to the specific sub-salt setting was acquired. This dataset has
undergone various rounds of reprocessing using a number of
pre-stack depth migration algorithms and velocity models
(Fig. 3). Evaluation of this survey, integrated with well results and
borehole
seismic data, has provided a step change in the further
characterization of the field. The seismic image at Princess is still
evolving with technology in pursuit of further development
opportunities in the field.
Figure 1. Princess Field Location Map.
End_Page 35---------------
Figure 2. 3D Time-Migrated Image
at the Time of Princess Discovery (N40W Acquisition).
Figure 3. Current 3D Pre-Stack
Depth Migrated Image from Dedicated N30E Acquisition.
End_of_Record - Last_Page 37---------------