About This Item
- Full text of this item is not available.
- Abstract PDFAbstract PDF(no subscription required)
Share This Item
The AAPG/Datapages Combined Publications Database
Houston Geological Society Bulletin
Abstract
Abstract: West Africa DHI’s: Pushing the Envelope
By
Tertiary clastic sedimentary rocks (primarily slope shales and turbidite sandstones) in the deepwater Lower Congo Basin have acoustic rock properties that allow seismic data to exhibit direct hydrocarbon indicators (DHI’s). To date, DHI technology has been successfully used to help discover billions of barrels of hydrocarbon in the basin.
Not all seismic anomalies are DHI’s and not all DHI’s are of equal quality. For this reason a DHI rating and risking method has been developed to aid data analysis and determine risk of leads showing seismic amplitude anomalies. The method involves comparing the observed seismic anomaly to expected seismic responses and to other known DHI’s for calibration. DHI attributes fall into general categories associated with the observed amplitude response and with conformance to structural and fluid contact reflections, but vary by other typically compaction-related rock properties. Seismic data quality and overlap between expected wet and hydrocarbon reservoir responses are also key factors used in the rating and risking process. Integration and rationalization of the DHI risk with geologic risk assessment is a final, critical step to ensure plausibility and reasonableness of the interpretations.
Historically, dry holes and sub-economic hydrocarbon accumulations
have been associated with anomalies exhibiting only one or
two DHI criteria. Those anomalies are now attributed to low-hydrocarbon
saturation, anomalous shales or silts, very high
porosity sands, or inadequate and/or substandard seismic data.
Examples are presented to illustrate the techniques used to identify
the spectrum of AVO classes and highlight the challenges in DHI
prediction. Ultimately, our experience indicates that multiple DHI
criteria (e.g., AVO, amplitude conformance, etc.) are associated
with successful wells. Care should be taken to not technically
rationalize the lack of these characteristics
when fundamental rock physics
suggests
otherwise.
End_of_Record - Last_Page 19---------------