About This Item

Share This Item

The AAPG/Datapages Combined Publications Database

AAPG Bulletin

Abstract


Volume: 67 (1983)

Issue: 3. (March)

First Page: 553

Last Page: 553

Title: Prediction of Depth and Previous HitVelocityNext Hit on VSP Data: ABSTRACT

Author(s): Dale G. Stone

Article Type: Meeting abstract

Abstract:

The Vertical Seismic Profile (VSP) method can often be used to assist in making drilling decisions. These decisions may involve anticipation of overpressured zones, distance to the seismically determined target, and verification of geologic or geophysical interpretation.

A VSP is recorded with a seismic source on the surface and receivers in the borehole. Both up and downgoing waves are recorded and are separable. Layers beneath the borehole are recorded in the upgoing waves at every receiver position. This redundancy can be exploited to achieve a high signal-to-noise ratio and good quality time-amplitude information. The conversion of amplitude to acoustic impedance gives time and interval Previous HitvelocityNext Hit with density held constant. Depth is then a function of time and interval Previous HitvelocityNext Hit.

A VSP has several advantages over surface seismic data in inversion. These include knowledge of attenuation, waveform, and multiples from averaging downgoing waves. The borehole coverage allows use of a control zone for establishing optimal inversion parameters. Averaging of upgoing waves gives an unusually good signal-to-noise ratio so that deconvolution with the averaged downgoing waves yields an excellent estimate of primary reflections. These considerations, combined with the favorable geometry of the VSP, provide for considerable accuracy in estimation of Previous HitvelocityTop and depth below the bit.

End_of_Article - Last_Page 553------------

Copyright 1997 American Association of Petroleum Geologists