About This Item
- Full TextFull Text(subscription required)
- Pay-Per-View PurchasePay-Per-View
Purchase Options Explain
Share This Item
The AAPG/Datapages Combined Publications Database
AAPG Bulletin
Abstract
AAPG Bulletin, V.
2009. The American Association of Petroleum Geologists. All rights reserved.
DOI:10.1306/05270909001
Quantification of pore structure and its effect on sonic
velocity
and permeability in carbonates
![Previous Hit](/data/images/arrow_left.gif)
![Next Hit](/data/images/arrow_right.gif)
Ralf J. Weger,1 Gregor P. Eberli,2 Gregor T. Baechle,3 Jose L. Massaferro,4 Yue-Feng Sun5
1University of Miami, Rosenstiel School of Marine and Atmospheric Science, Division of Marine Geology and Geophysics, 4600 Rickenbacker Causeway, Miami, Florida 33129; [email protected]
2University of Miami, Rosenstiel School of Marine and Atmospheric Science, Division of Marine Geology and Geophysics, 4600 Rickenbacker Causeway, Miami, Florida 33129; [email protected]
3University of Miami, Rosenstiel School of Marine and Atmospheric Science, Division of Marine Geology and Geophysics, 4600 Rickenbacker Causeway, Miami, Florida 33129
4Gerencia Geologia y Estudios Integrados, Direccion Exploracion y Desarrollo de Negocio, Macacha Guemes 515, (C1106BKK), Puerto Madero, Buenos Aires, Argentina
5Department of Geology and Geophysics, Texas AM University, College Station, Texas 77843
ABSTRACT
Carbonate rocks commonly contain a variety of pore types that can vary in size over several orders of magnitude. Traditional pore-type classifications describe these pore structures but are inadequate for correlations to the rock's physical properties. We introduce a digital image analysis
(DIA) method that produces quantitative pore-space parameters, which can be linked to physical properties in carbonates, in particular sonic
velocity
and permeability.
The DIA parameters, derived from thin sections, capture two-dimensional pore size (DomSize), roundness (), aspect ratio (AR), and pore network complexity (PoA). Comparing these DIA parameters to porosity, permeability, and P-wave
velocity
shows that, in addition to porosity, the combined effect of microporosity, the pore network complexity, and pore size of the macropores is most influential for the acoustic behavior. Combining these parameters with porosity improves the coefficient of determination (R2)
velocity
estimates from 0.542 to 0.840. The
analysis
shows that samples with large simple pores and a small amount of microporosity display higher acoustic
velocity
at a given porosity than samples with small, complicated pores. Estimates of permeability from porosity alone are very ineffective (R2 = 0.143) but can be improved when pore geometry information PoA (R2 = 0.415) and DomSize (R2 = 0.383) are incorporated.
Furthermore, results from the correlation of DIA parameters to acoustic data reveal that (1) intergrain and/or intercrystalline and separate-vug porosity cannot always be separated using
sonic logs, (2) P-wave
velocity
is not solely controlled by the percentage of spherical porosity, and (3) quantitative pore geometry characteristics can be estimated from acoustic data and used to improve permeability estimates.
Pay-Per-View Purchase Options
The article is available through a document delivery service. Explain these Purchase Options.
Watermarked PDF Document: $14 | |
Open PDF Document: $24 |
AAPG Member?
Please login with your Member username and password.
Members of AAPG receive access to the full AAPG Bulletin Archives as part of their membership. For more information, contact the AAPG Membership Department at [email protected].