About This Item
- Full TextFull Text(subscription required)
- Pay-Per-View PurchasePay-Per-View
Purchase Options Explain
Share This Item
The AAPG/Datapages Combined Publications Database
AAPG Bulletin
Abstract
AAPG Bulletin, V.
2012. The American Association of Petroleum Geologists. All rights reserved.
DOI:10.1306/04111110201
Estimation of kerogen porosity in source rocks as a function of thermal transformation: Example from the Mowry Shale in the Powder River Basin of Wyoming
Christopher J. Modica,1 Scott G. Lapierre2
1Pioneer Natural Resources, 5280 N. O'Connor Boulevard, Ste. 200, Irving, Texas 75039; [email protected]
2Pioneer Natural Resources, 5280 N. O'Connor Boulevard, Ste. 200, Irving, Texas 75039; [email protected]
ABSTRACT
Evaluations of porosity relevant to hydrocarbon storage capacity in kerogen-rich mudrocks (i.e., source rocks) have thus far been plagued with ambiguity, in large part because conventional core and petrophysical techniques were not designed for this rock type. The growing recognition of an intraparticle organic nanopore system that is related to thermal maturity is beginning to clarify this ambiguity. This mode of porosity likely evolved with the thermal transformation of labile kerogen and probably neither depends nor interacts (except perhaps chemically) with previously assumed matrix
or
mineral
porosity that is dominated by bound water, and that may be largely irrelevant to hydrocarbon storage capacity in these rocks. To address this newly recognized and important nonmatrix kerogen pore system, that is arguably the dominant hydrocarbon storage and mobility network in these rocks, we introduce a relatively simple kinetic model that describes porosity development within kerogen as a function of thermal maturation.
Kerogen porosity development is estimated within the upper Albian Mowry Shale in the Powder River Basin of Wyoming to illustrate the approach. Relevant storage capacity is considered to have evolved with thermal decomposition of organic matter during catagenesis, where we estimate that kerogen porosity does not typically exceed 3% of bulk rock volume. Modeled oil-in-place estimates are comparable to residual oil estimates from pyrolysis data (S1) at lower maturities, but exceed pyrolytic S1 yields at higher maturities. We hypothesize, therefore, that a subsurface kinetic porosity model might represent a means to account for S1 losses at surface conditions and to circumvent difficulties surrounding estimations of expulsion efficiencies that are inherent to more traditional mass balance calculations.
Pay-Per-View Purchase Options
The article is available through a document delivery service. Explain these Purchase Options.
Watermarked PDF Document: $14 | |
Open PDF Document: $24 |
AAPG Member?
Please login with your Member username and password.
Members of AAPG receive access to the full AAPG Bulletin Archives as part of their membership. For more information, contact the AAPG Membership Department at [email protected].