About This Item
- Full TextFull Text(subscription required)
- Pay-Per-View PurchasePay-Per-View
Purchase Options Explain
Share This Item
The AAPG/Datapages Combined Publications Database
AAPG Bulletin
Abstract
AAPG Bulletin, V.
2012. The American Association of Petroleum Geologists. All rights reserved.
DOI:10.1306/07261110178
Geologic modeling and fluid-flow simulation of acid gas disposal in western Wyoming
Shuiquan Li,1 Ye Zhang,2 Xu Zhang,3 Changan Du4
1Department of Geology and Geophysics, University of Wyoming, 1000 East University Avenue, Laramie, Wyoming; [email protected]
2Department of Geology and Geophysics, University of Wyoming, 1000 East University Avenue, Laramie, Wyoming; [email protected]
3Schlumberger Information Solutions (SIS), Schlumberger, 5599 San Felipe, Suite 1700, Houston, Texas; [email protected]
4Schlumberger Information Solutions (SIS), Schlumberger, 14131 Midway Road, Suite 700, Addison, Texas; [email protected]
ABSTRACT
The Moxa arch anticline is a regional-scale northwest-trending uplift in western Wyoming where geologic storage of acid gas (carbon dioxide, methane, nitrogen, hydrogen sulfide, ethane) is under consideration. Nugget Sandstone, a deep saline aquifer at depths exceeding 17,000 ft (5180 m), is a candidate formation. This study builds three-dimensional local- to regional-scale geologic and fluid-flow models for the Nugget Sandstone and its neighboring formations. Geologic and engineering characterization data were assembled and screened for accuracy. Using geostatistical simulations (first, sequential indicator simulation of facies, then the sequential Gaussian simulation of porosity []), the data were integrated to create a regional-scale geologic model from which a local-scale simulation model surrounding the proposed injection si te was extracted. Using this model, acid gas injection was simulated for 50 yr, followed by 1950 yr of monitoring. A sensitivity analysis was conducted, exploring the impact of geologic and engineering variables on model predictions. Results suggest that, at the simulation time scale, low dissolved solids in formation water, large gas-phase relative permeability (krg) hysteresis, and low
vertical
-to-horizontal intrinsic permeability (k) anisotropy all contribute to enhanced storage of acid gas in both residual (trapped) and dissolved forms. The parameter that exerts the largest control on gas storage is relative permeability hysteresis. However, given parameter uncertainty, the total predicted gas storage varies significantly. Prediction uncertainty increases in the order of dissolved gas, trapped gas, and mobile gas. In comparison, petrophysical uncertainty, as represented by multiple
realizations, has limited impact on prediction, although future work is needed to expand the uncertainty analysis by developing alternative facies models for the storage formations.
Pay-Per-View Purchase Options
The article is available through a document delivery service. Explain these Purchase Options.
Watermarked PDF Document: $14 | |
Open PDF Document: $24 |
AAPG Member?
Please login with your Member username and password.
Members of AAPG receive access to the full AAPG Bulletin Archives as part of their membership. For more information, contact the AAPG Membership Department at [email protected].