About This Item
- Full TextFull Text(subscription required)
- Pay-Per-View PurchasePay-Per-View
Purchase Options Explain
Share This Item
The AAPG/Datapages Combined Publications Database
AAPG Bulletin
Abstract
AAPG Bulletin, V.
2014. The American Association of Petroleum Geologists. All rights reserved.
DOI: 10.1306/02031413060
Calibrating discrete fracture-network models with a carbonate three-dimensional outcrop fracture network: Implications for naturally fractured reservoir modeling
K. Bisdom,1 B. D. M. Gauthier,2 G. Bertotti,3 and N. J. Hardebol4
1Delft University of Technology, Department of Geoscience and Engineering, Stevinweg 1, 2628 CN Delft,
2Total EP, Tour Coupole, 2 place Jean Millier, La Défense 6, 92078 Paris-La Défense Cedex,
3Delft University of Technology, Department of Geoscience and Engineering, Stevinweg 1, 2628 CN Delft,
4Delft University of Technology, Department of Geoscience and Engineering, Stevinweg 1, 2628 CN Delft,
ABSTRACT
Modeling naturally fractured reservoirs requires a detailed understanding of the three-dimensional (3D) fracture-network characteristics, whereas generally only one-dimensional (1D) data, often suffering from sampling artifacts, are available as inputs for modeling. Additional fracture properties can be derived from outcrop analogs with the scanline method, but it does not capture their full two-dimensional (2D) characteristics. We propose an improved workflow based on a 2D field-digitizing tool for mapping and analyzing fracture parameters as well as relations to bedding. From fracture data collected along 11 vertical surface outcrops in a quarry in southeast France, we quantify uncertainties in modeling fracture networks. The fracture-frequency distribution fits a Gaussian distribution that we use to evaluate the intrinsic fracture density variability within the quarry at different observation scales along well-analog scanlines. Excluding well length as a parameter, we find that 30 wells should be needed to fully (i.e., steady variance) capture the natural variability in fracture spacing. This illustrates the challenge in trying to predict fracture spacing in the subsurface from limited well data. Furthermore, for models with varying scanline orientations we find that Terzaghi-based spacing corrections fail when the required correction angle is more than 60°. We apply the 1D well analog data to calculate 3D fracture frequency using stereological relations and find that these relations only work for cases in which the orientation distribution is accurately described, as results greatly vary with small changes in the orientation distribution.
Pay-Per-View Purchase Options
The article is available through a document delivery service. Explain these Purchase Options.
Watermarked PDF Document: $14 | |
Open PDF Document: $24 |
AAPG Member?
Please login with your Member username and password.
Members of AAPG receive access to the full AAPG Bulletin Archives as part of their membership. For more information, contact the AAPG Membership Department at [email protected].