About This Item
- Full TextFull Text(subscription required)
- Pay-Per-View PurchasePay-Per-View
Purchase Options Explain
Share This Item
The AAPG/Datapages Combined Publications Database
AAPG Bulletin
Abstract
AAPG Bulletin, V.
2015. The American Association of Petroleum Geologists. All rights reserved.
DOI: 10.1306/05211514104
Characterization of natural fracture systems: Analysis of uncertainty effects in linear scanline results
Rafael F. V. C. Santos,1 Tiago S. Miranda,2 José A. Barbosa,3 Igor F. Gomes,4 Gabriel C. Matos,5 Julia F. W. Gale,6 Virginio H. L. M. Neumann,7 and Leonardo J. N. Guimarães8
1Civil Engineering Graduate Program, Federal University of Pernambuco, Recife, Pernambuco 50740-530,
2Geosciences Graduate Program, Federal University of Pernambuco, Recife, Pernambuco 50740-530,
3Department of Geology, Federal University of Pernambuco, Recife, Pernambuco 50740-530,
4Department of Civil Engineering, Federal University of Pernambuco, Recife, Pernambuco 50740-530,
5Petrobras Research Center (CENPES/GEOTEC), Rio de Janeiro 21941-915,
6Bureau of Economic Geology, Jackson School of Geosciences, University of Texas at Austin, Austin, Texas 78713; [email protected]
7Department of Geology, Federal University of Pernambuco, Recife, Pernambuco 50740-530,
8Department of Civil Engineering, Federal University of Pernambuco, Recife, Pernambuco 50740-530,
ABSTRACT
The exploitation of hydrocarbon reserves in naturally fractured reservoirs composed of different types of rocks has drawn considerable attention from the fracture characterization research community because of the importance of fractures to the prediction of fluid flow. One of the most common methods for rapidly analyzing fracture features is the scanline technique, which provides an estimate of fracture density and frequency. Despite the confidence provided by the systematic use of this method, errors and uncertainties caused by sampling biases exist. The problems caused by these uncertainties can detrimentally affect the construction of a computational model due to misleading trends.
This study evaluated the uncertainty caused by sampling biases in the scanline data of opening-mode fractures in outcrops of naturally fractured Aptian laminated limestone from the Crato Formation, Araripe Basin, northeastern Brazil. The Monte Carlo method was chosen to introduce random values into the sampled values, which enabled us to verify the importance of errors in the accuracy of the method of representing the fracture network.
In this study, errors and uncertainties were grouped into one parameter, termed the coefficient of uncertainty, which was defined as the ratio between the uncertainties, created by the errors and artifacts introduced artificially, and the original scanline data. The propagation of errors and uncertainties in the scanline data to the coefficients of the corresponding power
law were determined. This evaluation can be applied in the construction of more reliable geomechanical models using analog geological models for naturally fractured reservoirs.
Pay-Per-View Purchase Options
The article is available through a document delivery service. Explain these Purchase Options.
Watermarked PDF Document: $14 | |
Open PDF Document: $24 |
AAPG Member?
Please login with your Member username and password.
Members of AAPG receive access to the full AAPG Bulletin Archives as part of their membership. For more information, contact the AAPG Membership Department at [email protected].