About This Item

Share This Item

The AAPG/Datapages Combined Publications Database

AAPG Bulletin


DOI: 10.1306/08161918097

Evaluation of hydrocarbon broaching after subsurface containment failure, Gulf of Mexico

Thomas W. Bjerstedt,1 William W. Shedd,2 Michael G. Natter,3 Pierre B. Abadie,4 George J. Moridis,5 and Matthew T. Reagan6

1US Bureau of Ocean Energy Management (BOEM), US Department of the Interior, New Orleans, Louisiana; [email protected]
2BOEM, US Department of the Interior, New Orleans, Louisiana; [email protected]
3BOEM, US Department of the Interior, New Orleans, Louisiana; [email protected]
4BOEM, US Department of the Interior, New Orleans, Louisiana; [email protected]
5Lawrence Berkeley National Laboratory (LBNL), Berkeley, California; [email protected]
6LBNL, Berkeley, California; [email protected]


Broaching refers to the release of hydrocarbons at the seafloor after a loss of subsurface well containment. An underground blowout may allow migration of fluids upward through adjacent formations or the annulus to the seafloor. After the BP 001 Macondo well was capped, an oil slick was observed near the well. Available data were interpreted to determine if the slick was reservoir fluid broaching the seafloor or if it was a natural seep in the Gulf of Mexico. The experience revealed that no basis existed for estimating subsurface broach rates or how a potential to broach should be considered during well permitting decisions.

Lawrence Berkeley National Laboratory (LBNL) modeled two broaching failure scenarios selected by the Bureau of Ocean Energy Management (BOEM) and representative of Gulf geosystems. Geoscientists from BOEM provided reservoir parameters and interpreted geologic surfaces from depth-migrated three-dimensional seismic volumes. The LBNL adapted existing supercomputing capabilities to model the traveltime for formation fluids to reach the seafloor after subsurface containment failure.

The most sensitive parameters affecting traveltime are the mixture of formation fluids and the permeability of the geologic media through which it passes. Assuming nondepletion of reservoir pressure, gas-prone multiphase fluids may broach within a matter of decades. Wet oil and oil-prone multiphase fluids are slower by one to three orders of magnitude. The likelihood for the modeled systems to broach was mainly dependent on casing failure depth. The BOEM concluded that casing failures greater than 7500 ft (>2280 m) below mudline (seafloor) will not broach within a 6-month time frame of regulatory concern.

Pay-Per-View Purchase Options

The article is available through a document delivery service. Explain these Purchase Options.

Watermarked PDF Document: $14
Open PDF Document: $24

AAPG Member?

Please login with your Member username and password.

Members of AAPG receive access to the full AAPG Bulletin Archives as part of their membership. For more information, contact the AAPG Membership Department at [email protected].