About This Item

Share This Item

The AAPG/Datapages Combined Publications Database

Environmental Geosciences (DEG)

Abstract

Environmental Geosciences, V. 17, No. 4 (December 2010), P. 175192.

Copyright copy2010. The American Association of Petroleum Geologists/Division of Environmental Geosciences. All rights reserved.

DOI:10.1306/eg.04061010002

Application of the surface azimuthal electrical Previous HitresistivityNext Hit survey method to determine patterns of regional joint orientation in glacial tills

Douglas Carlson1

1Louisiana Geological Survey, Louisiana State University, Baton Rouge, Louisiana 70803; [email protected]

AUTHORS

Douglas Carlson received a Ph.D. in geosciences with a minor in water resources engineering from the University of Wisconsin-Milwaukee in 2001, an M.S. degree in geophysics from the New Mexico Institute of Mining and Technology, and B.S. degrees in geology and geophysics from the University of Minnesota. He was a physics and astronomy instructor at Ball State University and a physics lecturer at the University of Wisconsin-Stout in between M.S. and Ph.D. studies. He was a hydrologist for the U.S. Geological Survey, a geology lecturer and a geology associate lecturer for the University of Wisconsin-Milwaukee while completing his Ph.D. studies. For the past 8yr, he has been working for the Louisiana Geological Survey as an assistant professor-research. His research interests include application and interpretation of near-surface and borehole geophysics for the determination of aquifer characteristics. He is also interested in analysis of spatial distribution of water quality and water supply and hydraulic properties within aquifers for the development of groundwater models for regional water resource management.

ACKNOWLEDGEMENTS

I thank Douglas Cherkauer and Robert Taylor, Department of Geosciences, University of Wisconsin-Milwaukee (UWM). I appreciate their great ideas and suggestions that aided in the development of this study. I also appreciate the help provided by the following students at UWM, William Bristol, Timothy Davis, Daniel Hegrenes, Bojela Jedaimi, Leo Linnemanstons, Tina Reese, Dirk Schulze-Makuch, Gina Seegers, Jiqing Wang, and Barbara Wolf. Their help in the field conducting both Previous HitresistivityNext Hit soundings and azimuthal Previous HitresistivityNext Hit surveys made it possible to examine many more additional sites. Thanks to the three anonymous reviewers and Division of Environmental Geosciences Editor-in-Chief, Kristin Carter, for their suggestions, which have improved this manuscript.

ABSTRACT

Joints within unconsolidated material such as glacial till can be primary avenues for the flow of electrical charge, water, and contaminants. To facilitate the siting and design of remediation programs, a need exists to map anisotropic distribution of such pathways within glacial tills by determining the azimuth of the dominant joint set. The azimuthal survey method uses standard Previous HitresistivityNext Hit equipment with a Wenner array rotated about a fixed center point at selected degree intervals that yields an Previous HitapparentNext Hit Previous HitresistivityNext Hit ellipse. From this ellipse, joint set orientation can be determined.

Azimuthal surveys were conducted at 21 sites in a 500-km2 (193 mi2) area around Milwaukee, Wisconsin, and more specifically, at sites having more than 30 m (98 ft) of glacial till (to minimize the influence of underlying bedrock joints). The 26 azimuthal surveys revealed a systematic pattern to the trend of the dominant joint set within the tills, which is approximately parallel to ice flow direction during till deposition. The average orientation of the joint set parallel with the ice flow direction is N77degE and N37degE for the Oak Creek and Ozaukee tills, respectively. The mean difference between average direct observation of joint set orientations and average azimuthal Previous HitresistivityNext Hit results is 8deg, which is one fifth of the difference of ice flow direction between the Ozaukee and Oak Creek tills. The results of this study suggest that the surface azimuthal electrical Previous HitresistivityTop survey method used for local in situ studies can be a useful noninvasive method for delineating joint sets within shallow geologic material for regional studies.

Pay-Per-View Purchase Options

The article is available through a document delivery service. Explain these Purchase Options.

Watermarked PDF Document: $14
Open PDF Document: $24