About This Item
- Full text of this item is not available.
- Abstract PDFAbstract PDF(no subscription required)
Share This Item
The AAPG/Datapages Combined Publications Database
Fort Worth Geological Society
Abstract
ABSTRACT: Determining Petrophysical
Properties
and Gas Content in the Barnett Shale Using a
Log-based Neural Network Solution
![Previous Hit](/data/images/arrow_left.gif)
![Next Hit](/data/images/arrow_right.gif)
By
Petroleum Consultant, Houston, Texas
The Barnett Shale in the Fort Worth Basin of Texas is an
organic-rich black shale capable of producing large amounts of natural gas and
natural gas liquids. Traditional log analysis methods have not yielded
acceptable results when attempting to determine standard petrophysical
properties
. Therefore, log analysis alone is an impractical method of predicting
production in the Barnett Shale. Production in the Barnett Shale is affected by
several factors, only some of which may be measured or calculated using log
data, making gas content a poor predictor of well performance. However, a neural
network technique has been developed to successfully estimate reservoir
potential that relies on log derived qualitative and quantitative parameters.
Log analysis in the complex lithology of the Barnett Shale is
very difficult. The existence of several exotic minerals in the matrix along
with significant amounts of organic material
makes a algorithm-based solution
virtually impossible. Using extensive core data, a neural network solution was
developed to calibrate the logs to the needed petrophysical
properties
, and thus
enable the foot-by-foot calculation of gas content of the Barnett Shale. Since
any evaluation technique requires proper verification, examples will be shown to
demonstrate the effectiveness of the calibration.
The logs required to perform the analysis are readily available on most wells in the Fort Worth Basin, making the solution a practical exploration/exploitation tool. Outputs from the analysis include porosity, total organic content, water saturation, lithology, and gas content, both in the sorbed and free states.
Lee Utley is an independent petrophysical consultant specializing in unconventional reservoirs. After spending 10 years with Halliburton, he worked for 5 years as a petrophysical engineer with Mitchell Energy in The Woodlands as the primary petrophysicist in the Barnett Shale and the Fort Worth Basin. He is also the Houston representative for Petroleum Software Technologies, providing technical support for their suite of resistivity and SP modeling software as well as neural network software. Lee has a Bachelors degree in Petroleum Engineering from Texas Tech University and a Masters degree in Business Administration from Southern Methodist University.