About This Item
- Full TextFull Text(subscription required)
- Pay-Per-View PurchasePay-Per-View
Purchase Options Explain
Share This Item
The AAPG/Datapages Combined Publications Database
GCAGS Transactions
Abstract
Water Saturations in a Wilcox Shaly Reservoir Sandstone, Fordoche Field, Point Coupee Parish Louisiana
Charles R. Berg (1), Robert R. Berg (2)
ABSTRACT
A new model has been derived for calculation of water saturation in shaly reservoir sandstones. The model is based on effective medium theory (EMT) and has been used successfully on a wide range of clayey, low-resistivity reservoirs. A further, independent test of saturations calculated by the model was made for a deep Wilcox shaly reservoir at a depth of 13,176 ft (4016 m) in Fordoche field. The reservoir (W8) has a low, average resistivity of about 2.5 ohm-m and an estimated 18% clay as compared to an average resistivity of 1.5 ohm-m in an underlying wet sandstone (W-10) of similar clay content. For the reservoir, calculated water saturations are in the range of 35 to 50%, increasing downward, and suggest that the shaly sandstone should produce water-free oil. Other shaly sand models generally give water saturations in excess of 50% for the reservoir. Water saturations calculated by the EMT model agree well with other parameters for sandstones: reported production, core analysis, and synthetic capillary pressures. The reservoir (W8) had an initial potential of 213 bbl of oil per day, confirming water-free oil production which could have been predicted by the EMT model.
Pay-Per-View Purchase Options
The article is available through a document delivery service. Explain these Purchase Options.
Watermarked PDF Document: $14 | |
Open PDF Document: $24 |