About This Item
- Full text of this item is not available.
- Abstract PDFAbstract PDF(no subscription required)
Share This Item
The AAPG/Datapages Combined Publications Database
GCAGS Transactions
Abstract
ABSTRACT: 3-D Synthetic Seismic Modeling of Turbidite Sandstones
Kathleen O. Horkowitz (1), William R. Morris (1), Mark H. Scheihing (1), H. DeVille Wickens (2)
(1) ARCO Exploration and Production Technology, Plano, TX
(2) Consultant, South Africa.
ABSTRACT
3-D synthetic seismic models were generated for a fine-grained, sand-rich turbidite system to illustrate lateral variability in acoustic impedance and seismic response as a function of turbidite facies architecture. The models represent a 250 meter exposed section containing 4 stacked turbidite fan complexes from the Karoo Basin, South Africa. The ultimate goal of this work is to aid in seismic interpretation of deepwater turbidite prospects and reservoirs.
Model generation consisted of: 1) construction of the 3-D lithostratigraphic framework from detailed outcrop descriptions and gamma ray measurements, 2) calculation and assignment of rock properties representative of consolidated subsurface reservoir sandstones and shales, and 3) generation of the 3-D synthetic seismic trace volume.
Acoustic impedance values were calculated using an empirical relationship to estimate P-wave velocity from porosity and clay volume. Synthetic seismic volumes were generated by convolving the reflectivity function derived from the acoustic impedance volume with Ricker wavelets having different peak-frequencies. These models illustrate: 1) the seismic response to changes in thickness and acoustic impedance of the turbidite channel, lobe and overbank facies without hydrocarbon effects, and 2) the ability to resolve the individual fan complexes using different model pulses
End_of_Record - Last_Page 2-------
Copyright © 1999 by The Gulf Coast Association of Geological Societies