About This Item
- Full TextFull Text(subscription required)
- Pay-Per-View PurchasePay-Per-View
Purchase Options Explain
Share This Item
The AAPG/Datapages Combined Publications Database
Journal of Petroleum Geology
Abstract
Journal of Petroleum Geology, vol.
THE EVOLUTION OF A MODEL
TRAP
IN THE CENTRAL APENNINES, ITALY: FRACTURE PATTERNS,
FAULT
REACTIVATION AND DEVELOPMENT OF CATACLASTIC ROCKS IN CARBONATES AT THE NARNI ANTICLINE
![Previous Hit](/data/images/arrow_left.gif)
![Next Hit](/data/images/arrow_right.gif)
![Previous Hit](/data/images/arrow_left.gif)
![Next Hit](/data/images/arrow_right.gif)
![Previous Hit](/data/images/arrow_left.gif)
![Next Hit](/data/images/arrow_right.gif)
![Previous Hit](/data/images/arrow_left.gif)
![Next Hit](/data/images/arrow_right.gif)
The fracture pattern at the Narni Anticline developed as a result of three mechanisms:
(a) layer-parallel shortening predating folding and faulting; (b) thrust-related folding and further thrust breakthrough; and (c) extensional and strike-slip faulting. Along-strike (longitudinal) fractures developed during progressive rollover![Previous Hit](/data/images/arrow_left.gif)
![Next Hit](/data/images/arrow_right.gif)
![Previous Hit](/data/images/arrow_left.gif)
![Next Hit](/data/images/arrow_right.gif)
The evolution of fracturing in the Narni Anticline, its role in constraining thrust breakthrough trajectories and the location of extensional and strike-slip faults, and the final development of low-permeability cataclastic bands, will be relevant to studies of known oilfields in the Southern Apennines, as well as for future exploration.
*Dipartimento di Scienze Geologiche, Universit? ???Roma Tre???, Largo S. L. Murialdo 1, 00146 Roma, Italy.+Corresponding Author: e-mail [email protected]
INTRODUCTION
Many potential trap
structures in the Apennines are characterized by their great structural complexity, with extensional and strike-slip deformation overprinting a complex compressional framework. In spite of this complexity, some of the largest hydrocarbon discoveries in Italy are located well within the Apennine thrust belt (e.g. the Monte Alpi and Tempa Rossa oilfields: Fig. 1), and smaller oilfields such as Ripi are located towards the western (Tyrrhenian) margin. Structural complexity alone has not therefore prevented hydrocarbons from accumulating and being preserved in the Apennines, but in some cases has favoured the formation of structural traps.
Reservoir rocks at Monte Alpi and Tempa Rossa are provided by fractured carbonates of the Apulian Platform, over which are thrust Lagonegro-Molise basinal units (Mostardini and Merlini, 1986; Casero et al., 1991). The discovery of these fields has drawn attention to the importance of brittle deformational features in carbonate rocks because they have a fundamental influence on permeability distribution. Brittle deformation features develop in carbonates in response to both folding and faulting, mainly as pressure-solution cleavage arrays (Mitra and Yonkee, 1985), tensile fractures and small-scale faults (Wojtal, 1986; Holl and Anastasio, 1992); in this paper, we refer to all these structures as fractures unless otherwise specified.
The three-dimensional distribution of fold-related fractured rock panels depends on the kinematics and geometry of a fault
-related fold (Dahlstrom, 1990; Evans and Dunne, 1991; Storti and Salvini, 1996; Fischer and Wilkerson, 2000; Salvini and Storti, 2001). Folding-related fractures can be divided into (a) longitudinal fractures (Type II of Stearns, 1968), which are parallel to fold axes (e.g. Mitra, 1987); and (b) transverse fractures (Type I of Stearns, 1968), which are perpendicular to fold axes and include conjugate arrays (Mitra, 1987). Longitudinal fractures mainly develop by pressure solution when rocks are folded by rolling across an active axial surface (Fig. 2a). The distribution of longitudinal fractures can be predicted by assuming a simple relationship between the angle of bending, the number of bends and the longitudinal fracture intensity (Storti and Salvini, 1996; Salvini and Storti, 2001). Self-similar fracturing is assumed, which means that rocks rolling around an active hinge line during kink-band folding (Suppe, 1983) undergo homogeneous fracturing parallel to the fold hinge. Differences in folding mechanisms and rock rheologies and inhomogeneous mechanical stratigraphies will produce more complex fracture patterns (Fischer and Jackson, 1999). However, it is reasonable to assume hinge-parallel homogeneous fracturing for the first-order prediction of fracture intensity in carbonate rocks.
Fractures in fault
zones can develop at a variety of angles with respect to the maximum principal axis of the local stress ellipsoid induced during the frictional sliding of adjacent faulted blocks (Petit, 1987). The fractures can be perpendicular (pressure solution cleavage), parallel (tensile fractures) or at low angle (shear fractures) to the local ?1. The geometric relationship between the
fault
slip direction and the attitude of the pressure-solution cleavage produces opposite patterns in map view and cross-section, respectively, for extensional and strike-slip faults (Fig. 2b, c). For extensional faults, cleavage traces parallel the
fault
trace in map view, but dip at shallower angles than the
fault
in cross section. The opposite occurs in strike-slip faulting; the cleavage traces make an acute angle with respect to the
fault
trace in map view (facing the
fault
-slip direction), and are parallel to the
fault
in cross section (Salvini et al., 1999).
A fundamental difference between fold-related and fault
-related fractures relates to their spatial distribution. Fractures due to faulting are localized in narrow deformation bands, whereas they are distributed over large rock panels when produced by folding. The interference of fracture systems causes rock fragmentation and favours cataclasis during localized shear. Cataclastic bands play an important role in hydrocarbon migration and trapping, because they can either seal or leak depending on the amount of displacement, on local conditions that can vary over short distances within a single
fault
zone, and on the rheology of the offset rocks.
In this paper, we describe the structural evolution of the Narni Anticline in the central Apennines (Lotti, 1926). This structure provides an opportunity to study at outcrop the final deformation pattern of a structural trap
typical of the western and central parts of the Apennines. The structure developed as a result of sequential thrust-related folding, thrust breakthrough, extensional faulting and strike-slip faulting; due to this structural complexity, the term ???anticline??? is oversimplified. Particular emphasis is given to the role of the inherited fracture pattern in constraining the location and geometry of younger deformation structures, and to the progressive evolution of fracturing and cataclasis in the carbonate rocks of which the Narni Anticline is composed (Fig. 3).
Fig. 2. Geometric relationships between pressure-solution cleavage and
fault
surfaces in cross section (above) and map view (below) for (a) passive folding at
fault
bends, (b) extensional faulting and (c) strike-slip faulting. See text for details
REGIONAL TECTONIC FRAMEWORK
The Apennine-Tyrrhenian Sea region (Fig. 1) has evolved in response to Neogene oblique convergence between Africa and Eurasia (Laubscher, 1971). A particular feature of the region is the presence of eastward-migrating zones of compression and extension (Elter et al., 1975; Patacca et al.,1993; Jolivet et al., 1998). Compressional deformation is mostly located near the toe of the Apenninic thrust wedge, where the foredeep successions of the Adriatic foreland have been accreting since the Miocene in an overall piggyback sequence (Principi and Treves, 1984). Synchronous thrusting (Cipollari et al., 1995) and out-of-sequence thrusting (Morley, 1988) have further increased the structural complexity of the orogen (Bigi et al., 1989; Storti, 1995a). Extensional deformation in the northern Tyrrhenian Sea and on the western side of the Apennine thust belt is related to an eastward-verging/ dipping, asymmetric, low-angle detachment system (Kastens et al., 1988; Storti, 1995a; Jolivet et al., 1998) which separates the Sardinia-Corsica continental block (lower plate) from the overlying Apenninic belt (upper plate). Extension in the upper plate is accommodated by both east- and west-dipping, high-angle normal faults (Elter et al., 1975; Keller et al., 1993). Strike-slip faults overprinting this compressional and extensional framework have been described throughout the Apennines from the northern sector (Storti 1995a), via the central zone (Salvini, 1992), to the south (Monaco et al., 1998).
Fig. 3. The stratigraphy of the Umbria-Marche Succession, which is unconformably overlain by Pliocene-Pleistocene siliciclastic rocks (after Chiocchini et al., 1995). The large arrow indicates the main d̩collement at the base of the multilayer. Small arrows indicate the position of secondorder d̩collements.
![](thumbs/fig04.jpg)
![Previous Hit](/data/images/arrow_left.gif)
![Next Hit](/data/images/arrow_right.gif)
GEOLOGICAL SETTING OF THE NARNI ANTICLINE
The Narni Anticline is located on the western margin of the central Apennine thrust belt which, to the east of the Tiber River Valley (Fig. 4), is made up of an east-verging array of unmetamorphosed carbonate thrust sheets and related terrigenous deposits. The rocks involved in the Narni Anticline belong to the Umbria-Marche Succession, a stratigraphic unit encompassing rocks of Triassic to Miocene ages (Fig. 3) (Chiocchini et al., 1995). The oldest rocks were deposited in a shallow-marine littoral setting (Burano Evaporites and Calcari a Rhaetavicula contorta Formations), which evolved into a carbonate platform (Calcare Massiccio Formation), then to a basinal environment (Corniola to Bisciaro Formations), passing up to the foredeep terrigenous clastics of the Marnoso Arenacea Formation. Pliocene-Pleistocene conglomerates and sandstones unconformably overlie the older, more deformed rocks (Parotto and Praturlon, 1975).
Fig. 5. SW-NE cross-section across the Narni Anticline (see Fig. 4 for location). Note the presence of an overturned succession involving the Umbria-Marche multilayer from the Corniola Formation to the Bisciaro Formation. Strike-slip re-activation of thrust ramps and extensional faults is evident. Ornaments as in Fig. 4.
The Burano Formation crops out in few places in the central Apennines; however, the oldest exposed rocks of the Umbria-Marche Succession generally belong to the Calcari a Rhaetavicula contorta Formation. Nevertheless, Burano Evaporites have been encountered in many boreholes (Martinis and Pieri, 1964), and this suggests that they may provide the basal d̩collement for the imbricate fan structure to the east of the Tiber River Valley (Bally et al., 1988). A number of marly formations within the stratigraphic succession may provide second-order d̩collements (Fig. 3).
In order to investigate the tectonic evolution of the Narni Anticline, a detailed research programme was carried out. This included field mapping, meso- and microstructural analysis of brittle deformational features, cross-section balancing, analogue modelling and geometric modelling (Storti 1995b). Illite crystallinity and clay mineralogy data support a shallow crustal level for the development of the Narni Anticline. In particular, illite crystallinity (K?bler index = 0.49?s ???2?) and mineral assemblages (calcite + quartz + illite + smectite + chlorite + illite/smectite ?hlorite/smectite mixed layers) strongly support early diagenetic conditions during deformation (Lezzerini et al., 1995). Geometric forward modelling including syntectonic erosion and sedimentation suggests that the structure evolved as a growth fold at the toe of the late Burdigalian Apenninic thrust wedge (Storti and Salvini, 1996).
A simplified structural map of the Narni Anticline is shown in Fig. 4. Most of the structural complexity developed during thrusting and folding. Four main thrust sheets are separated by three NW-SE trending thrust faults (Fig. 5). The tectonic transport direction is toward the NE. The lowermost thrust sheet crops out in the NE of the area, in the southern part of the Terni Basin (Fig. 4). At its surface are exposed the Marnoso Arenacea sandstones, marls and clays, whose overall attitude is generally flat-lying. This thrust sheet is overlain by a second one made up of pelagic carbonate rocks (Scaglia Rossa to Bisciaro Formations). The central and southern sectors of the roof f
ault of this thrust sheet were reactivated as a left-lateral strike-s
lip f
ault during the Pleistocene (Storti, 1995b). The third thrust sheet is made up of an overturned pelagic carbonate succession (Corniola to Bisciaro Formations). Second-order, bedding-parallel thrusts are located in the Marne a Fucoidi and Rosso Ammonitico. The presence of this overturned rock panel, which is more than 22km long and 4km wide (Fig. 4), is the most significant feature of the Narni Anticline. The overturned sector is in turn overlain by an upper thrust sheet which is also made up of a carbonate succession; this comprises the Calcare Massiccio which crops out widely in the northern and central sectors, up to the Scaglia Cinerea, exposed in the southern sector. A main lateral ramp occurs to the NW of Mt Cosce. Finally, remnants of the hangingwall ramp of a thrust-related anticline overlying the Narni Anticline are preserved along the western margin of the structure, and includes the Calcari a Rhaetavicula contorta, the Calcare Massiccio and the Corniola Formations.
![](thumbs/fig06.jpg)
![Previous Hit](/data/images/arrow_left.gif)
![Next Hit](/data/images/arrow_right.gif)
![Previous Hit](/data/images/arrow_left.gif)
![Next Hit](/data/images/arrow_right.gif)
Development of the Narni Anticline can best be explained by progressive rollover
fault-propagation folding (Storti and Salvini, 1996). In this model,
the
fault-fold kinematics of Suppe and Medwedeff (1990) have been modified by introducing additional bending in the frontal region of
the
fault-propagation anticline to account for the mechanical stability of the overturned forelimb (Fig. 6a). With continuing contraction, the simple-step anticline is translated foreland-ward, and is dissected by a multiple breakthrough array. This consists in sequence of d̩collement breakthrough, synclinal breakthrough and anticlinal breakthrough (Figs 6b, c and d). The superimposition of these breakthrough events ultimately produces the complex imbricate array modelled in Fig. 6e.
Fig. 7. Pitted stylolites perpendicular to bedding in the overturned forelimb of the Narni Anticline. In the stereographic projection, heavy lines are stylolites; broken line indicates the average attitude of bedding; and the dot indicates the average attitude of stylolitic pits. Schmidt net, lower hemisphere.
![Previous Hit](/data/images/arrow_left.gif)
![Next Hit](/data/images/arrow_right.gif)
![Previous Hit](/data/images/arrow_left.gif)
![Next Hit](/data/images/arrow_right.gif)
![Previous Hit](/data/images/arrow_left.gif)
![Next Hit](/data/images/arrow_right.gif)
FRACTURE DISTRIBUTION AND DEVELOPMENT IN THE NARNI ANTICLINE
The overprinting of three main deformation phases (thrusting, extensional faulting and strike-slip faulting) has resulted in a complex structural pattern ??? and a complex fracture distribution ??? in the study area. Fractures in the Narni Anticline can be grouped into three major patterns all of which overprint a pre-existing solution cleavage system related to layer-parallel shortening: (a) hinge-parallel and hinge ???perpendicular??? fractures (mostly pressure-solution cleavage) in the protolith rocks; (b)
fault-parallel fractures in extensional damage zones; an
d (c)
fault-oblique fractures in strike-slip damage zones.
Fracture panels
Rock panels between faults are much less fractured than damage zones. Three sectors can be identified in the Narni Anticline, based on the number, attitude and spacing of cleavage systems: (i) an outer sector, which includes the two eastern thrust sheets; (ii) an intermediate sector corresponding to the overturned thrust sheet, and (iii) an inner sector, which corresponds to the roof thrust sheet. The oldest structural elements that have been panel (Fig. 8d). The cleavage intensity in the overturned sector is high, and cleavage spacing varies from less than 1cm to about 20cm.
Fig. 8. Pressure-solution cleavage populations associated with folding and faulting in the Narni Anticline. (a) Relationship between cleavage (heavy lines) and bedding (broken lines) in the eastern thrust sheets. (b) Cleavage-bedding relationships in the overturned sector; note the presence of two cleavage populations trending parallel to bedding. (c) Cleavage-bedding relationships in the upper thrust sheet. (d) Typical fractured carbonate rocks cropping out in the overturned sector; note the presence of a fracture system oblique to bedding. (e) Beddingperpendicular, pressure-solution cleavage in the moderately fractured rocks in the upper thrust sheet. a, b, and c: Schmidt net, lower hemisphere.
Fig. 9. Former extensional
fault in the Tiber River graben reactivated as a high angle re
verse
fault in a positive flower structure.
The inner sector consists largely of the limestones of the Calcare Massiccio Formation, which generally dip towards the SW, apart from minor, second-order gentle folds. The main pressure-solution cleavage system trends NW-SE, parallel to bedding, and dips steeply towards the NE (Figs. 8c, e). Another fracture system is more dispersed and strikes NESW. The spatial distribution across strike of the main fracture system is not uniform, and few, relatively narrow, intensely fractured rock panels are intercalated within the less deformed, wider ones.
N
![](thumbs/fig10.jpg)
![Previous Hit](/data/images/arrow_left.gif)
![Next Hit](/data/images/arrow_right.gif)
![Previous Hit](/data/images/arrow_left.gif)
![Next Hit](/data/images/arrow_right.gif)
N
Damage zonesDamage zones (Caine et al., 1996) in carbonate rocks are mainly exposed in the western and central sectors of the Narni Anticline, and are most clearly developed in the massive limestones of the Calcare Massiccio Formation. They have evolved in response to both extensional and strike-slip faulting. However, due to the footwall position of the Narni Anticline with respect to the Tiber River Valley boundary
fault system, and to its strike-slip re-activation (Fig. 9), first-order extensional damage zones have not been preserved. Second-order extensional damage zones consist of an array of pressure solution cleavage surfaces trending almost parallel t
o the
fault surfaces, which overprint the fracture fabric of the protolith rocks. The dip of the extension-related, pressure-solution cleavage system is slightly shallower than that of the corresponding faults (Fig. 10a), and the spacing of the cleavage surfaces ranges from less than 2cm to about
10cm.
Fault cores are generally not well developed, probably due to the small displacement along
these
fault zones.
The best-developed damage zones relate to strike-slip faulting. A particularly well exposed zone crops out along a NW-SE trending belt in the central sector of the Narni Anticline (Fig. 4). Its width ranges from few metres along splay
fault strands in anastomosed arrays, to about 50m wher
e the
fault zone is localised. Strike-slip damage zones are typically accompanied by a pressure-solution cleavage system which makes an acute angle with the re
lated
fault surfaces (and face
s the
fault-slip direction) (Fig. 10b
) (??
?fault-propagation cleavage??? of Salvini et al., 1999). This angle varies from about 30?o 55?ith an average value of about 40? very similar to that characterising the left-lateral, strike-slip Matt
inata
Fault in the Gargano Promontory (Salvini et al., 1999; Billi and Salvini, 2001). Pressure-solution cleavage in strike-slip damage zones in the Narni Anticline overprints both the fracture pattern of the protolith rocks, and also the extension-related, pressure-solution cleavage system where extensional damage zones have been re-activated. The spacing of the cleavage in the strike-slip damage zones varies from less than 1cm to about 16cm (Fig. 11a).
Fig. 11. Field photograp
hs of
fault rocks associated with strike-slip faulting in the Narni Anticline. (a) Strongly fractured Calcare Massiccio limestones in a damage zone. (b) Poorly cohesive cataclasite in the Calcare Massiccio Formation. (c) Vertical foliation in the Scaglia Cinerea Formation, here involved in a positive flower structure.
Fig. 12. Forward-modelled fracture panels related to progressive rol
lover
fault-propagation folding (see Fig. 6). The increasing intensity of shading indicates increasing fracture intensity. (a) Simple
-step
fault-propagation folding. Note the high fracture intensity predicted in the forelimb, and the virtually undeformed crest. (b) d̩collement breakthrough. (c) synclinal breakthrough. (d) anticlinal breakthrough. (e) multiple breakthrough resulting from the superimposition of breakthrough geometries in b, c and d. Forward models of fracture panels have been generated following Salvini and Storti (1997).
Strike-slip damage zones surround cataclastic and brecciated bands constituting th
e fault cores (Caine et al., 1996) (Fig. 11b
)
. Fault cores are lens-shaped and their along-strike width varies from less than 1m to more tha
n 10m
. Fault-core rocks are poorly cohesive to non-cohesive and their grain size varies from less than 0.1mm to approximately 50mm. Localisat
ion o
f fault motion has produced centimetric to decimetric ba
nds o
f fault gouge with
in th
e fault cores. The distribution of fracturing is more complex where strike-slip faults have re-activated previously extensional damage zones. The high-angle superimposition of t
he tw
o fault-related fracture arrays favoured rock fragmentation, comminution and the development of
wide
r fault cores.
A very different fabric characterises th
e fault zones exposed in the eastern side of the Narni Anti
cline
. Fault zones mostly occur in the marls and marly limestones of the Scaglia Cinerea and Bisciaro Formations. The weak rheology of these rocks favoured re-orientation of the pre-existing planar fabric (bedding and thrust-related pressure-solution cleavages) within highly-localised, elongate belts of near-vertical to vertical foliation (Fig. 11c).
DEVELOPMENT OF FRACTURES AND THE LOCALIZATION OF FAULTS
Fracture systems developed throughout the evolution of the Narni Anticline, from layer-parallel shortening predating folding to much later strike-slip faulting. The mechanical anisotropy produced by the pre-existing fracture patterns influenced the location and geometry of younger structural elements. To model the interaction between fracturing and faulting over time, we assumed that the discontinuous fracture distribution developed by faulting and folding overprinted an earlier homogeneous one resulting from parallel shortening.
Fig. 13a. Forward-modelled multiple breakthrough structure (Fig. 6e) overlain by a passivelyrefolded, thrust-related anticline. Notice the steeply-dipping ramp (46? at the rear of the structure. (b) Extensional re-activation of the former thrust ramp at the rear of the structure. (c) strike-slip re-activation of the former exten
siona
l fault at the rear of the structure and of thrust ramps in the frontal part of the structure. The heavily-fractured, overturned sector favours strik
e-sli
p fault location in the central sector of the structure.
Storti and Salvini (1996) predicted the distribution of longitudinal deformation panels (i.e. panels of rock in which the deformational features are expected to be homogeneous, henceforth referred to as ???fracture panels???) during simple-step progressive rollover faultpropagation folding (Fig. 12a). We used the same semi-quantitative approach to predict fracture panel distribution for breakthrough configurations. Fig. 12a shows a heavilyfractured panel in the overturned core and recumbent forelimb, sandwiched between two less-deformed sectors. However, the crest of the anticline is virtually undeformed. The fracture pattern which is developed during progressive rollove
r fault-propagation folding f
avour
s fault breakthrough during folding (Suppe and Medwedeff, 1990) and, consequently, the increased complexity of the fracture panels. Figs. 12b to 12d model the distribution of fracture panels for d̩collement, synclinal and anticlinal breakthrough, respectively. These breakthrough arrays occurred sequentially during development of the Narni Anticline, and superimposition of the corresponding fracture panels has produced a complex final pattern (Fig. 12e). It is worth noting that the predicted attitude of hinge-parallel fractures is generally not perpendicular to bedding. Even in a complex breakthrough array like that in Fig. 12e, the upper thrust sheet preserves wide panels whose fracture intensity can be predicted to be moderate, due to the gentle angles by which the rocks have been folded. Moreover, fractures and bedding are nearly perpendicular. This deformation pattern closely matches that which we observed in the Narni Anticline, where the Calcare Massiccio limestones in the roof thrust sheet are generally only moderately fractured, with a few localised panels in which the fracture intensity is higher.
![](thumbs/fig14.jpg)
![Previous Hit](/data/images/arrow_left.gif)
![Next Hit](/data/images/arrow_right.gif)
undergone anticlinal breakthrough. High-angle faulting has caused compartmentalisation of the
structure. Possible sites of hydrocarbon accumulation are indicated. The permeability properties
of the faults will be critical to reservoir sealing or leaking.
When the thrust-related anticline at the rear of the Narni Anticline is included in the forward-modelled structure (Fig. 13a), the passively backward-tilted footwall ramp constitutes a weak zone suitable for extensional re-activation. In the study area, it is likely that this pre-existing zone of weakness localized extensional faulting to the west of the Narni Anticline, while the bulk of the fold was preserved unaffected by significant extension. This model implies that only a major thrust-related damage zone was re-activated during the onset of the extensional tectonics and the development of the Tiber River Valley graben.
The model in Fig. 13b shows two main weak sectors at the end of extension: the highly-localized extension
al fault zone on the western side; and the overturned panel, which is heavily fractured and bounded by thrust faults, and in which bedding dips steeply towards the SW. The overturned rock panel thus provides a number of possibilit
ies f
or fault localization: the boundary thrusts, the hinge zones separating adjacent fracture panels, and weaker layers within the steeply-dipping rock multilayer. In the Narni Anticline, all these zones of weakness in the overturned limb, as well as the pre-existing exte
nsion
al fault zone along the western boundary, have been re-activated by NW-SE trending, left-lateral strike-slip faulting. The near-vertical attitude of strike-slip faults does not prevent re-activation of thrust-ramps at depth in a staircase trajectory, as proposed in Fig. 13c.
The overprinting of deformation associated with strike-slip damage zones onto a preexisting fracture pattern favoured rock fragmentation and comminution, and the development of cataclastic rocks. The spatial variability of folding-related fractures may have favoured the three-dimensional discontinuous occurrence of cataclastic rocks.
IMPLICATIONS FOR HYDROCARBON MIGRATION AND TRAPPING
This study of the Narni Anticline has implications for hydrocarbon migration and accumulation in the tectonically-complex, thrust-related structures buried within the Apennine belt which constitute targets for hydrocarbon exploration. The stratigraphic succession includes potential source rocks such as the euxinic marls within the Triassic Calcari a Rhaetavicula contorta Formation, and the Upper Cretaceous marls and marly limestones of the Marne a Fucoidi Formation (Katz et al., 2000).
The overprinting of multiple deformation events has produced a series of heavily fractured rock panels, many of which are antiformal (Fig. 13c). The marls of the Scaglia Cinerea and Bisciaro Formations and the clay-rich sequence in the Marnoso Arenacea Formation, at the top of the carbonate succession, may provide a seal for hydrocarbon accumulations in these convex-upward structures.
Strike-slip faults caused compartmentalization of the Narni Anticline into a number of vertically-elongated sub-sectors, each of which includes rocks with different amounts of fracturing. Permeability in strike-sl
ip fault zones in carbonates mainly depends
on t
he fault-core rocks, because the heavily-fractured damage zones are generally highly permeable (Chester et al., 1993; Dholakia et al.,
>1998
). Fault-core rocks
inclu
de fault breccias, cataclasi
tes a
nd fault gouges. Their occurrence and 3D distribution depends on the nature of the protolith roc
ks, t
he fault geometry
and t
he fault displacement. Strongly-comminuted cataclas
ite a
nd fault gouge may constitute permeability barriers. In the Narni Anticline, the generally low amounts of displacement along the strike-slip faults favours their role as potential migration pathways towards the convex-upward fold structures (also enhancing reservoir performance), rather than acting as lateral seals (Fig. 14). However, vertical lithological variations, such as the occurrence of marls and clays at the
top
of fault zones in the eastern side of the Narni Anticline, may favou
r loc
al fault sealing.
CONCLUSIONS
The Narni Anticline provides an opportunity to study the 3D distribution and evolution of fractures in a thrust-related anticline whose architecture is similar to tectonically complex, buried structures in the Southern Apennines. Two main environments for fracturing have been found in the study are
a: fault-related fracturing in extensional and strike-slip damage zones; and fold-related fracturing in the protolith rocks between faults. The overprinting of fold-related fract
ures
by fault-related fractures in damage zones favoured rock fragmentation and comminution, and the development of cataclastic bands. Localiza
tion
of fault slip within cataclastic bands caused develop
ment
of fault gouges.
Longitudinal and transverse fractures characterize the protolith rocks and relate to the development of the Narni Anticline by progressive rollov
er fault-propagation folding. Forward modelling of the fracture panels associated with this style of folding (and with multiple thrust breakthrough) showed that it is characterized by a highly-fractured forelimb, a weakly-fractured forelimb, and a virtually unfractured crest. Multiple thrust breakthrough does not alter this fracture distribution substantially, even if additional fractures are developed in the roof thrust sheet.
The structural position
of fault damage zones, their 3-D geometry and their fabric indicate the strong influence that the early fold-related fracture pattern had on the location of both the extensional and strike-slip faults which caused compartmentalization of the anticlinal structure.
ACKNOWLEDGEMENTS
We gratefully acknowledge careful review of the manuscript by K. Jagiello, H. Koyi (Uppsala University) and G. W. O???Brien (AGSO). This work has been supported financially by MURST grants (from the Ministero dell???Universit? e della Ricerca Scientifica) awarded to Francesco Salvini.
REFERENCES
ALFONSI, L., FUNICIELLO, R., GIROTTI, O., MAIORANI, A., MARTINEZ, M. P., MATTEI, M., TRUDU, C. AND TURI, B., 1991. Structural and geochemical feature of the Sabina strike-sl
ip fault. Bollettino della Societ? Geologica Italiana, 110, 217-230.
BALLY, A. W., BURBI, L., COOPER, C. AND GHELARDONI, R., 1988. Balanced sections and seismic reflection profiles across the central Apennines. Memorie della Societ? Geologica Italiana, 35 (1986), 257-310.
BIGI, G., CASTELLARIN, A., CATALANO, R., COLI, M., COSENTINO, D., DAL PIAZ, G. V., LENTINI, F., PAROTTO, M., PATACCA, E., PRATURLON, A., SALVINI, F., SARTORI, R., SCANDONE, P. AND VAI, G. B., 1989. Synthetic structural-kinematic map of Italy (1:2.000.000). Paper presented at the 28th International Geological Congress, Washington D C, USA.
BILLI, A AND SALVINI, F., 2001 (this issue000">
). Fault-related cleavage in exposed carbonate reservoir rocks of the Southern Apennines, Italy. Journ. Petrol. Geol., 24, (2), 147-169.
BUONASORTE, G., FIORDELISI, A., PANDELI, E., ROSSI, U. AND SOLLEVANTI, F., 1987. Stratigraphic correlations and structural setting of the pre-neoautochthonous sedimentary sequences of Northern Latium. Periodico di Mineralogia, 56, 111-122.
CAINE, J. S., EVANS, J. P. AND FORSTER, C. B., 199
6. Fault zone architecture and permeability structure. Geology, 24, 1025-1028.
CASERO, P., ROURE, F. AND VIALLY R., 1991. Tectonic framework and petroleum potential of the Southern Apennines. In: Spencer, A. M. (Ed.): Generation, accumulation, and production of Europe???s hydrocarbon. Oxford University Press, Oxford, EAPG Special Publication 1, pp. 381-387.
CHESTER, F. M., EVANS, J. P. AND BIEGEL, R. L., 1993. Internal structure and weakening mechanisms of the San Andre
as Fault. Journal of Geophysical Research, 98, 771-786.
CHIOCCHINI, U., CHIOCCHINI, M. AND STORTI, F. 1995. Studio stratigrafico-strutturale dell???area di Narni per la galleria ferroviaria Santa Croce (Appennino Centrale). Bollettino del Servizio Geologico D???Italia, 112, 27-48.
CIPOLLARI, P., COSENTINO, D. AND PAROTTO, M., 1995. Modello cinematico-strutturale dell???Italia centrale. Studi Geologici Camerti, special volume, 1995/2, 135-143.
CONTI, P., COSTANTINI, A., DECANDIA, F. A., ELTER, F. M., GATTIGLIO, M., LAZZAROTTO, A., MECCHERI, M., PANDELI, E., RAU, A., SANDRELLI, F., TONGIORGI, M. AND DI PISA, A., 1991. Structural frame of the tuscan paleozoic: a review. Bollettino della Societ? Geologica Italiana, 110, 523-541.
DAHLSTROM, C. D. A., 1990. Geometric constraints derived from the law of conservation of volume and applied to evolutionary models for detachment folding. AAPG Bull., 74, 336-344. DHOLAKIA, S. K., AYDIN, A., POLLARD, D. D. AND ZOBACK M. D., 199
8. Fault-controlled hydrocarbon pathways in the Monterey Formation, California. AAPG Bull., 82, 1551-1574.
ELTER, P., GIGLIA, G., TONGIORGI, M. AND TREVISAN, L., 1975. Tensional and contractional areas in the recent (Tortonian to Present) evolution of the Northern Apennines. Bollettino di Geofisica Teorica e Applicata, 17, 3-18.
EVANS, M. A. AND DUNNE, W. M., 1991. Strain factorization and partitioning in the North Mountain thrust sheet, central Appalachians, U.S.A. Journal of Structural Geology, 13, 21-35.
FISCHER, M.P. AND JACKSON, P.B., 1999. Stratigraphic controls on deformation patterns
in fault-related folds: a detachment fold example from the Sierra Madre Oriental, northeast Mexico. Journal of Structural Geology, 21, 613-633.
FISCHER, M. P. AND WILKERSON, S., 2000. Predicting the orientation of joints from fold shape: results of pseudo-three-dimensional modeling and curvature analysis. Geology, 28, 15-18. FISCHER, M.P., WOODWARD, N.B. AND MITCHELL, M.M., 1992. The kinematics of break-thrust folds. Journal of Structural Geology, 14, 451-460. GEYSER, P. A. AND SANSONE, S., 1981. Joints, microfractures and the formation of solution cleavage in limestone. Geology, 9, 280-285.
F. Storti and F. Salvini
HOLL, J. E. AND ANASTASIO, D. J., 1992. Deformation of a foreland carbonate thrust system, Sawtooth Range, Montana. Geol. Soc. Am. Bull., 104, 944-953.
JOLIVET, L., FACCENNA, C., GOFF?, B., MATTEI, M., ROSSETTI, F., BRUNET, C., STORTI, F., FUNICIELLO, R., CADET, J. P., D???AGOSTINO, N. AND PARRA, T., 1998. Midcrustal shear zones in postorogenic extension: Example from the northern Tyrrhenian Sea. Journal of Geophysical Research, 103, 12,123-12,160.
KATZ, B. J., DITTMAR, E. I. AND EHRET, G. E., 2000. A geochemical review of carbonate source rocks in Italy. Journ. Petrol. Geol., 23, 399-424.
KASTENS, K., et al., 1988. ODP Leg 107 in the Tyrrhenian Sea: Insights into passive margin and back-arc basin evolution. Geol. Soc. Am. Bull., 100, 1140-1156.
KELLER, J. V. A., MINELLI, G. AND PIALLI, G., 1993. Anatomy of late orogenic extension: the Northern Apennine case. Tectonophysics, 238, 275-294.
LAUBSCHER, H. P., 1971. The large-scale kinematics of the western Alps and the northern Apennines and its palinspastic implications. American Journal of Science, 271, 193-226.
LEZZERINI, M., STORTI, F. AND TAMPONI, M., 1995. Dati preliminari sulla ???cristallinit???? dell???Illite in alcune formazioni della successione umbro-marchigiana (Appennino centrale). Atti della Societ? Toscana di Scienze Naturali, Memorie Serie A., 101, 145-152.
LOTTI, B., 1926. Descrizione geologica dell???Umbria. Memorie Descrittive della Carta Geologica D???Italia, 1-293.
MARTINIS, B. AND PIERI, M., 1964. Alcune notizie sulla formazione evaporitica del Triassico superiore nell???Italia Centrale e Meridionale. Memorie della Societ? Geologica Italiana, 19, 649-678.
MITRA, S., 1987. Regional variations in deformation mechanisms and structural styles in the central Appalachian orogenic belt. Geol.l Soc. Am. Bull., 98, 569-590.
MITRA, G., AND YONKEE, W. A., 1985. Relationship of spaced cleavage to folds and thrusts in the Idaho-Utah-Wyoming thrust belt. Journal of Structural Geology, 7, 361-373.
MONACO, C., TORTORICI, L. AND PALTRINIERI, W., 1998. Structural evolution of the Lucanian Apennines. Journal of Structural Geology, 20, 617-638.
MORLEY, C. K., 1988. Out-of-sequence thrusts. Tectonics, 7, 539-561.
MOSTARDINI, F. AND MERLINI, S., 1986. Appennino Centro Meridionale, sezioni geologiche e proposta di modello strutturale. Memorie della Societ? Geologica Italiana, 35, 177-202.
PAROTTO, M. AND PRATURLON, A., 1975. Geological summary of Central Apennines. Quaderni de La Ricerca Scientifica, 90, 257-311.
PATACCA, E., SARTORI, R. AND SCANDONE, P., 1993. Tyrrhenian basin and Apenninic arcs:kinematic relations since Late Tortonian times. Memorie della Societ? Geologica Italiana, 45 (1990), 425-451.
PETIT, J. P., 1987. Criteria for the sense of movement
on fault surfaces in brittle rocks. Journal of Structural Geology, 9, 597-608.
PIERI, M. AND MATTAVELLI, L., 1986. Geologic framework of the Italian Petroleum resources. AAPG Bull., 70, 103-130.
PRINCIPI, G. AND TREVES, B., 1984. Il sistema corso-appennino come prisma di accrezione. Riflessi sul problema generale del limite Alpi-Appennini. Memorie della Societ? Geologica Italiana, 28, 549576.
ROURE, F. AND SASSI, W., 1995. Kinematics of deformation and petroleum system appraisal in Neogene foreland fold-and-thrust belts. Petroleum Geoscience, 1, 253-269.
SALVINI, F., 1992. Tettonica a blocchi in settori crostali superficiali: modellizzazione ed esempi da dati strutturali in Appennino centrale. Studi Geologici Camerti, special volume 1991/2, 237-247.
SALVINI, F. AND VITTORI, E., 1982. Analisi strutturale della linea Olevano-Antrodoco-Posta (Ancona-Anzio Auct.): metodologia di studio delle deformazioni fragili e presentazione del tratto meridionale. Memorie della Societ? Geologica Italiana, 24, 337-355.
SALVINI, F. AND STORTI, F., 1997. Spatial and temporal distribution of fractured rock panels from geometric and kinematic models of thrust-related folding. AAPG Bull., (abstract) 81, 1409.
SALVINI, F. AND STORTI, F., 2001. The distribution of deformation in parall
el fault-related folds with migrating axial surfaces: comparison
betwe
en fault-propagat
ion a
nd fault-bend folding. Journal of Structural Geology, 23, 25-32.
SALVINI, F. BILLI, A. AND WISE, D. U., 1999. Strike-sl
ip fault-propagation cleavage in carbonate rocks of the Gargano Promontory (Southern Apennines, Italy). Journal of Structural Geology, 21, 1731-1749.
STEARNS, D. W., 1968. Certain aspects of fracture in naturally deformed rocks. In: Rieker R.E. (ed.) National Science Foundation advanced science seminar in rock mechanics, special report. Air Force Cambridge Research Laboratories, Bedford, Massachusetts, AD66993751, 97-118.
STORTI, F., 1995a. Tectonics of the Punta Bianca promontory: insights for the evolution of the northern Apennines-northern Tyrrhenian Sea basin. Tectonics, 14, 832-847.
STORTI, F., 1995b. Studio geologico-strutturale, analisi geometrica e modellizzazione fisica della struttura dei Monti di Narni. PhD thesis, University of Pisa, Italy.
STORTI, F. AND SALVINI, F., 1996. Progressive rollov
er fault-propagation folding: a possible kinematic mechanism to generate regional-scale recumbent folds in shallow foreland belts. AAPG Bull., 80, 174193.
SUPPE, J., 1983. Geometry and kinematics
of fault-bend folding. American Journal of Science, 283, 684721.
SUPPE, J. AND MEDWEDEFF, D. A., 1990. Geometry and kinematics
of fault-propagation folding. Eclogae Geologicae Helvetiae, 83, 409-454.
TAVARNELLI, E., 1997. Structural evolution of a foreland fold-and-thrust belt: the Umbria-Marche Apennines, Italy. Journal of Structural Geology, 19, 523-534.
WOJTAL, S., 1986. Deformation within foreland thrust sheets by populations of minor faults. Journal of Structural Geology, 8, 341-360.
Pay-Per-View Purchase Options
The article is available through a document delivery service. Explain these Purchase Options.
Watermarked PDF Document: $14 | |
Open PDF Document: $24 |