About This Item
- Full TextFull Text(subscription required)
- Pay-Per-View PurchasePay-Per-View
Purchase Options Explain
Share This Item
The AAPG/Datapages Combined Publications Database
Journal of Petroleum Geology
Abstract
Journal of Petroleum Geology, vol.
DEPOSITIONAL AND DIAGENETIC HISTORY OF THE
KERENDAN CARBONATE PLATFORM, OLIGOCENE,
CENTRAL KALIMANTAN, INDONESIA
A. H. Saller* and S. Vijaya**
*Unocal Corporation, Sugar Land, Texas 77478, USA. author for correspondence, [email protected] **Unocal Indonesia, Balikpapan, Indonesia.
The Kerendan carbonate platform (Oligocene Berai Limestone) covers a subsurface area measuring approximately 11 by 16 km in the westernmost Kutei Basin, Central Kalimantan. Aggradation of the Kerendan platform occurred during a major Oligocene transgression, and is contemporaneous with aggradation and backstepping of the Barito shelf margin which was located approximately 30 km to the south. The Kerendan platform is approximately 1,000 m thick, and comprises three aggrading seismic sequences identified by the downlap of basinal strata at the platform margin and downlap of transgressive strata within the platform. Carbonate deposition started in the Late Eocene, and ended when the upper limestone sequence drowned and was covered with shale in the Late Oligocene (approximately 28.6 Ma). Three depositional areas can be distinguished in seismic sections: (1) a platform interior (lagoon); (2) a slightly raised platform rim (1-2 km wide); and (3) a basinward-dipping platform margin and slope. The margin of the platform is identified by inflections on the seismic profiles where the relatively flat platform top begins to slope basinward.
Depositional models from outcrops combined with core from three Kerendan wells were used to extrapolate depositional facies onto the seismically-defined platform. Platform-interior (lagoon) facies consist largely of fossiliferous wackestones and packstones, and porosities are generally lower than 5%. The platform rim is characterized by interbedded bioclastic wackestones, packstones, grainstones and boundstones, with grainstones increasing toward the platform margin. Porosity preferentially occurs in packstones, grainstones and boundstones. The platform-rim deposits have greater porosity (5-13%) than the platform interior because the platform rim is more grainstone-rich, and because acidic waters compacting out of basinal shales concentrated dissolution near the platform margin. Pore types include vuggy porosity, microporosity within grains, and intercrystalline porosity in dolomite in the upper part of the platform rim. Different pore types have resulted in variable but locally very high permeabilities (greater than 100 mD). Permeabilities decrease with depth as vuggy pores decrease, and microporosity becomes dominant.
Pay-Per-View Purchase Options
The article is available through a document delivery service. Explain these Purchase Options.
Watermarked PDF Document: $14 | |
Open PDF Document: $24 |