About This Item
- Full text of this item is not available.
- Abstract PDFAbstract PDF(no subscription required)
Share This Item
The AAPG/Datapages Combined Publications Database
Saskatchewan Geological Society
Abstract
Diamond Exploration,
ABSTRACT: THE USE OF AEROMAGNETICS AND VECTOR MAGNETICS IN GOLD AND DIAMOND SEARCH WITH EXAMPLES FROM BOTSWANA AND AUSTRALIA
1 Questor Surveys Ltd.
200 Grand River Ave.
Brantford, Ontario
N3T 4X9
2 Aerodata Holdings
Perth, Australia
The Vector-Mag system is flown on a Cessna 206Aircraft and measures the total magnetic field using three Scintrex H6 cesium vapour sensors, two mounted on the wingtips and a third installed as a conventional tail stinger enabling both transverse and longitudinal gradients to be measured The magnetometer counting circuitry and aircraft acquisition system were developed at Aerodata Holding Ltd., Australia. Separation between the wingtip sensors is 14.9 metres and the axial separation between the tail sensor and wingtip sensors is 6.9 metres. Compensation of aircraft manoeuvre noise was accomplished with in-house software to reduce noise levels by factors of 10-20.
Recently a PICODAS gradiometer acquisition system was installed in the aircraft. The system samples each sensor with a resolution of 10-3nT and the compensation software reduces manoeuvre noise to less than 10pt/metre.
Gradiometer measurements offer a number of advantages over measurements of the total magnetic intensity. Superior resolution of closely spaced geological features and better definition and location of geological contacts are important advantages in exploration.
Very small variations in the total field data can be assigned to geological or other non-temporal sources if they are supported by corresponding variations in the gradients. This confidence is of vital importance in exploration for diamondiferous kimberlites and lamproites, and other targets such as precious and base meted ore bodies with minor associated pyrrhotite where the magnetic response of the target is subdued. Gradient
data also enhances near surface features and discriminates against deeper features.
Horizontal gradient
information can be incorporated into the imaging and contouring of total field data permitting a better portrayal of geological trends, overcoming the 'bullseye' and other mapping errors commonly created by anisotropic sampling of data.
Arrow maps where the total horizontal gradient
vector is represented as an arrow, and contours of total horizontal
gradient
and total horizontal
gradient
processed with automatic gain control (AGC) have proved to be useful displays of
gradient
data. As with total magnetic intensity information the image processor offers decisive advantages for the display of magnetic
gradient
data. Judicious use of colour and shading enables a geologically meaningful presentation where subtle magnetic features are emphasized.