About This Item
- Full text of this item is not available.
- Abstract PDFAbstract PDF(no subscription required)
Share This Item
The AAPG/Datapages Combined Publications Database
AAPG Special Volumes
Abstract
By
Originally presented at the 1998 Hedberg (AAPG) Research Conference at Galveston, TX
Book/CD-ROM Title:
Edited by
determining
the costs of developing commercial deposits and
successfully operating expensive production and transportation systems. Because key
engineering and economic
parameters
of crude oil and natural gas pools vary widely across
the continental slope of Louisiana and Texas, E&P staff must understand the nature and
origin of these variations in order to properly assess the risks and uncertainty of
conducting deepwater operations that are very sensitive to the intrinsic properties of HC
fluids. Integrating standard reservoir engineering data available in PVT reports with
conventional geochemical data yields useful insights into subsurface processes that
subsequently can be used to reduce these risks and uncertainties.
The gravity (Fig.1) and the gas-to-oil ratio (GOR; Fig.2)
of deepwater oils range widely. Other important properties of these crudes, such as their
organic acid and asphaltene contents, also exhibit considerable variability. A host of
geological processes - including the type of kerogen and the thermal maturity of the
organic matter in deeply-buried source rocks, and the amount and kind of secondary
transformation and mixing events occurring in petroleum reservoirs - control key
parameters
of crude oils and gases. For example, oil pools residing in cool, shallow
(<9000 ft below mud line) reservoirs commonly are hybrid mixtures of residual
biodegraded petroleum and a later charge of much lighter, unaltered oil or wet gas.
Unfortunately, the geological complexity of vertical and lateral migration and mixing
processes makes it difficult to accurately predict crucial oil or gas properties. For
example, two-fold changes in GOR are known to occur between some vertically-stacked lobes
of oil sand within individual pay zones. Additional risks include the presence of very
sour (>3 wt% sulfur) conventional oil and non-biodegraded tarry petroleum that has been
encountered at a few widely-separated locations.
Distinct oil provinces are readily identified across the deepwater Gulf of Mexico. Sweet oil that contains <1 wt% sulfur is found in the gassy Viosca Knoll and East Breaks lease areas. The carbon isotopic composition of the methane dissolved in or associated with the Viosca Knoll oils demonstrates that the natural gas there largely has a thermal origin. These sweet oil pools commonly are saturated under reservoir conditions. Sour oil pools that are found in the western Mississippi Canyon, Green Canyon, and Garden Banks lease areas, in contrast, typically are significantly undersaturated under reservoir conditions (commonly by 5,000-10,000 psi). These undersaturated sour oils furthermore generally contain a significant amount of dissolved bacterial methane (typically 25-50% by volume). Thus, most sour oils in the deepwater Gulf of Mexico apparently have inherently low "thermal" gas-to-oil ratios (GORs). The GOR of many sour oil pools reflects the relative mix between highly-undersaturated crude and a distinct charge of bacterial methane. Conversely, some natural gas pools that consist largely of bacterial methane yield significant amounts of condensate that probably represents dissolved crude oil.
Figure 1.
Oil Quality in the Deepwater Gulf of Mexico.
Figure 2.
Natural Gas Content of Crude Oil in the Deepwater Gulf of Mexico.