About This Item

Share This Item

The AAPG/Datapages Combined Publications Database

AAPG Special Volumes

Abstract


 
 
Chapter from: M 61: Basin Compartments and Seals 
Edited by 
Peter J. Ortoleva

 Author:
John S. Bradley and David E. Powley

Methodology and Concepts

Published 1994 as part of Memoir 61
Copyright © 1994 The American Association of Petroleum Geologists. All Rights Reserved.
 

Chapter 1

*
Pressure Compartments in Sedimentary Basins: A Review

John S. Bradley
Consultant
Tulsa, Oklahoma, U.S.A.
David E. Powley
Consultant
Tulsa, Oklahoma, U.S.A.



*

ABSTRACT


Pressure compartments are found in sedimentary basins throughout the world. They are defined primarily by hydraulic potentials calculated from pressure measurements but may be indicated by differing brine and hydrocarbon chemistries; by mineralogic differences; by Previous HitelectricalNext Hit Previous HitresistivityTop, sonic velocity, and density of the shales; and by mud weight requirements and drilling rate changes.

Pressure compartments are characterized by an effective seal, in three dimensions, that prevents pressure equilibration to normal hydrostatic pressure. A pressure seal, as opposed to a capillary seal, restricts flow of both hydrocarbon and brine and is formed where the pore throats become effectively closed, i.e., the permeability approaches zero. A leaking pressure seal, called a "rate seal," occurs when the pressure difference caused by subsidence-sedimentation or uplift-erosion or other pressure source is greater than the seal pressure leakage. When the internal fluid pressure in the compartment exceeds the fracture pressure of the seal, the seal will fracture and fluids will escape from the compartment. The fracture and resealing may occur repeatedly.

Multiple pressure seal origins must be invoked to explain their geometric and stratigraphic occurrence. Certainly some pressure seals appear to be stratigraphically controlled with perhaps more or less diagenetic enhancement. Some seals, particularly those that cross stratigraphy, appear to be entirely diagenetic. The lateral seals, which appear to be subvertical to vertical, are possibly due to faulting and fracturing or to lateral facies changes. An extensive investigation of seal origin, recognition, and duration is being undertaken by a consortium of universities under the sponsorship of the Gas Research Institute.
 

Pay-Per-View Purchase Options

The article is available through a document delivery service. Explain these Purchase Options.

Watermarked PDF Document: $14
Open PDF Document: $24