About This Item

Share This Item

The AAPG/Datapages Combined Publications Database

AAPG Special Volumes

Abstract

Barth, G. A., D. W. Scholl, and J. R. Childs, 2009, Bering sea velocity-amplitude anomalies: Exploring the distribution of natural gas and gas-hydrate indicators, in T. Collett, A. Johnson, C. Knapp, and R. Boswell, eds., Natural gas hydrates—Energy resource potential and associated geologic hazards: AAPG Memoir 89, p. 324–349.

DOI:10.1306/13201109M893347

Copyright copy2009 by The American Association of Petroleum Geologists.

Bering Sea Velocity-amplitude Anomalies: Exploring the Distribution of Natural Gas and Gas-hydrate Indicators

Ginger A. Barth, David W. Scholl, and Jonathan R. Childs

U.S. Geological Survey, Menlo Park, California, U.S.A.

ACKNOWLEDGMENTS

Ray Sliter, Florence Wong, Cara Kiger-Boyer, and Gretchen Zwart assisted in our development of a Landmark seismic reflection database for the Bering Sea. GMT (Wessel and Smith, 1991; 1998), including its tension-gridding algorithm (Smith and Wessel, 1990), was used in the production of the included figures. This manuscript has been enriched by discussions with John Barron, Joe Cartwright, Patrick Hart, Stephen Kirby, Robert Kleinberg, Ken Peters, and Warren Wood, as well as review comments and suggestions by Nathan Bangs, Patrick Hart, Debbie Hutchinson, and Marc DeBatist. The commitment of the volume editors is much appreciated.

ABSTRACT

Velocity-amplitude anomalies (VAMPs), comprising coincident seismic Previous HittraveltimeNext Hit anomalies and gas bright spots, are features widely identified in seismic reflection images from the deep-water Bering Sea basins. Interval Previous HittraveltimeNext Hit anomalies are used to develop a method for the objective detection and quantification of these features. The approach selected uses relative Previous HittraveltimeTop variation in the sedimentary intervals above and below the gas-hydrate bottom-simulating reflector (BSR) as a diagnostic, measuring pull-up in the hydrate stability zone and push-down in the underlying gas zone, relative to a 400-common-depth-point (CDP) running-average interval reference. The method is used to explore the distribution of gas and hydrate indicators within a 120-km (74-mi) reflection profile segment in the central Aleutian Basin. This study segment includes 17 detected VAMPs, only 6 of which appear to contain significant quantities of stored hydrate. The total estimated volume of natural gas stored within the hydrate caps of these VAMPs is about 4 tcf (0.1 tcm). The largest three VAMP features contain greater than 85% of that total. Not all of the most visually obvious VAMPs are important hydrate contributors. We suggest that VAMPs are fluid-expulsion features that have become involved in the transport of natural gas. As such, the VAMP systems should have been more active in the past. The VAMPs with significant hydrate present are most likely to be active today. The largest VAMPs, including all of those associated with hydrate indicators, are located above prominent basement highs. This association suggests that fluid-migration patterns in these undeformed deep-water basins were originally established in response to sedimentation and compaction over basement topography, and that those ancient patterns have never been superceded. It also suggests that to make an informed estimate of gas-hydrate total volumes for the deep-water Bering Sea, the regional relationship between VAMP hydrate concentrations and basement topographic highs needs to be considered.

Pay-Per-View Purchase Options

The article is available through a document delivery service. Explain these Purchase Options.

Watermarked PDF Document: $14
Open PDF Document: $24