About This Item

Share This Item

The AAPG/Datapages Combined Publications Database

AAPG Special Volumes

Abstract

Taylor, C. E., J. Lekse, and N. English, 2009, Methane-hydrate laboratory and modeling research: Bridging the gap, in T. Collett, A. Johnson, C. Knapp, and R. Boswell, eds., Natural gas hydrates—Energy resource potential and associated geologic hazards: AAPG Memoir 89, p. 740–745.

DOI:10.1306/13201137M893368

Copyright copy2009 by The American Association of Petroleum Geologists.

Methane-hydrate Laboratory and Modeling Research: Bridging the Gap

Charles E. Taylor,1 Jonathan Lekse,2 Niall English3

1U.S. Department of Energy, National Energy Technology Laboratory, Pittsburgh, Pennsylvania, U.S.A.
2U.S. Department of Energy, National Energy Technology Laboratory, Pittsburgh, Pennsylvania, U.S.A.
3U.S. Department of Energy, National Energy Technology Laboratory, Pittsburgh, Pennsylvania, U.S.A.

ACKNOWLEDGMENTS

Reference in this report to any specific commercial product, process, or service is to facilitate understanding and does not necessarily imply an endorsement or favoring by the U.S. Department of Energy.

ABSTRACT

Methane hydrates are clathrates (crystalline solids whose building blocks consist of a gas molecule that stabilizes and is surrounded by a cage of water molecules) where methane is the guest molecule. Methane hydrates are stable and occur naturally in continental margin and permafrost sediment. At standard temperature and pressure (STP), one volume of saturated methane hydrates contains approximately 180 volumes of methane. Current estimates suggest that at least twice as much organic carbon is contained in methane hydrates as all other forms of fossil fuels combined. The methane-hydrate deposits along the coast and in permafrost areas of the United States contain an estimated 320,000 tcf (9000 tcm) of methane. To tap into this vast resource, research is needed to understand the fundamental physical properties of hydrates.

This chapter is an introduction to the National Energy Technology Laboratory (NETL) hydrate facilities and capabilities. The NETL Methane Hydrate Research Group conducts research in four key areas: modeling, computation, thermodynamic properties, and kinetic properties. Our modeling focuses on flow simulation in reservoirs. Computational research models hydrate formation and dissociation. Thermodynamic properties research focuses on measurements of both synthetic and naturally occurring hydrates. Kinetic properties research measures the kinetic properties of methane hydrates (both synthetic and naturally occurring), including the physical properties of hydrates synthesized in one of the many view cells at NETL that range in volume from 1 mL to 15 L.

Pay-Per-View Purchase Options

The article is available through a document delivery service. Explain these Purchase Options.

Watermarked PDF Document: $14
Open PDF Document: $24