About This Item
- Full TextFull Text(subscription required)
- Pay-Per-View PurchasePay-Per-View
Purchase Options Explain
Share This Item
The AAPG/Datapages Combined Publications Database
AAPG Special Volumes
Abstract
Hovadik, Joseph, and David Larue,
DOI:10.1306/13301406M961028
2011 by The American Association of Petroleum Geologists.
Predicting Waterflood Behavior by Simulating Earth Models with No or Limited Dynamic Data: From Model Ranking to Simulating a Billion-Cell Model
Joseph Hovadik,1 David Larue2
1Chevron Energy Technology Company, San Ramon, California, U.S.A.
2Chevron North America Exploration and Production, Bakersfield, California, U.S.A.
ACKNOWLEDGMENTS
We thank the Energy Technology Company of Chevron for continued support over the years. We thank Hong Tang, Michael Shook, Alex Castellini, Julian Thorne, and Michael Pyrcz for reviewing the manuscript. We also thank Zee Ma and two reviewers for substantially increasing the quality of the chapter.
ABSTRACT
Three-dimensional geologic characterizations of reservoirs are used in waterflood simulation studies to predict oil and gas field recovery efficiencies, quantities of water, oil and gas production over time, and for well optimization and economic studies. Quantitative global characterizations of the static reservoir, for example, reservoir connectivity or permeability heterogeneity, can be used to help explain waterflood performance, but with a wide range in result quality.
In the current study, aspects of dynamic simulation of waterfloods were replaced by static approximations using a quantitative localized approach, in which information about distances and properties within the reservoir is used to help predict waterflood performance. A “ladder” of waterflood flow simulators was considered, ranging from simulators using only static or rock property information, to simulators using static and dynamic information, to state-of-the-art dynamic simulators. Predictions based on each simulator type were compared with predictions using a state-of-the-art simulator. The simplest waterflood simulator uses a static model with only permeability and porosity information. These approximations to fluid flow can be improved by including dynamic considerations, such as an approximation of water saturation behind the waterfront (obtained by solving the Buckley-Leverett transport equation) or an approximation to the velocity
of the advancing waterfront (obtained by solving the Darcy equation for a single pressure step).
In the cases considered here, comparing swept volume or recovery factor using our simplest static flow simulators with results using a state-of-the-art simulator yielded R2 values in the range of 0.5 to 0.65. By better characterizing geometric aspects of the reservoir, R2 values of 0.65 to 0.75 were attained. By adding a single pressure step, R2 values of 0.8 to 0.85 were calculated. Ranking, or perhaps binning, can be achieved using simulations based on earth models with limited dynamic information. Ultralarge models containing a billion cells can be simulated with little difficulty using this approach.
Pay-Per-View Purchase Options
The article is available through a document delivery service. Explain these Purchase Options.
Watermarked PDF Document: $14 | |
Open PDF Document: $24 |